SCARA based peg-in-hole assembly using compliant IPMC micro gripper

被引：77
|
作者：
Jain, R. K. [1 ]
Majumder, S. [1 ]
Dutta, A. [2 ]
机构：
[1] CMERI, CSIR, Design Mech Syst Grp, Micro Robot Lab, Durgapur 713209, WB, India
[2] Indian Inst Technol, Dept Mech Engn, Kanpur 208016, Uttar Pradesh, India
来源：
ROBOTICS AND AUTONOMOUS SYSTEMS | 2013年 / 61卷 / 03期
关键词：
Peg-in-hole assembly; SCARA; IPMC micro gripper; Compliant assembly; ELECTRIC CONNECTORS; FAULT-DETECTION;
D O I：
10.1016/j.robot.2012.12.001
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Robotic assembly is difficult as there always exist position errors between two mating parts. Compliance is added in a selective compliant assembly robot arm (SCARA) in the form of a two ionic polymer metal composite (IPMC) fingers based micro gripper. This micro gripper is integrated at the end effector position of a SCARA robot. Peg-hole interaction is analytically modeled and based on it the force required to correct the lateral and angular errors by IPMC is calculated. A proportional-derivative (PD) controller is designed to actuate the IPMC to get the desired force for correcting the peg position before assembly. Simulations and experiments were carried out by developing an IPMC micro gripper and using it to analyze various cases of peg in hole assembly. The experimental results prove that adding compliance through IPMC helps in peg-in-hole assembly. (c) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码：297 / 311
页数：15
相关论文
共 50 条
  • [1] Development of Piezoelectric Actuator Based Compliant Micro Gripper for Robotic Peg-in-hole Assembly
    Jain, Ravi K.
    Saha, Surajit
    Majumder, Somajoyti
    2013 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS (ROBIO), 2013, : 1562 - 1567
  • [2] Compliant Peg-in-Hole Assembly Using a Very Soft Wrist
    Zhang, Qi
    Hu, Zhengtao
    Wan, Weiwei
    Harada, Kensuke
    IEEE ROBOTICS AND AUTOMATION LETTERS, 2024, 9 (01) : 17 - 24
  • [3] Type Synthesis of Hybrid Compliant Mechanisms for Peg-in-Hole Assembly
    Song Y.
    Guo Z.
    Wang P.
    Sun T.
    Lian B.
    Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology, 2020, 53 (06): : 582 - 592
  • [4] Compliant Peg-in-Hole Assembly for Components with Grooves Based on Attractive Region in Environment
    Liu, Yang
    Chen, Ziyu
    Zhang, Xiaodong
    Gao, Jie
    2021 6TH IEEE INTERNATIONAL CONFERENCE ON ADVANCED ROBOTICS AND MECHATRONICS (ICARM 2021), 2021, : 919 - 924
  • [5] Interpretation of force and moment signals for compliant peg-in-hole assembly
    Newman, WS
    Zhao, YH
    Pao, YH
    2001 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS I-IV, PROCEEDINGS, 2001, : 571 - 576
  • [6] Dual Arm Peg-in-Hole Assembly with a Programmed Compliant System
    Park, Hyeonjun
    Kim, Peter Ki
    Bae, Ji-Hun
    Park, Jae-Han
    Baeg, Moon-Hong
    Park, Jaeheung
    2014 11TH INTERNATIONAL CONFERENCE ON UBIQUITOUS ROBOTS AND AMBIENT INTELLIGENCE (URAI), 2014, : 431 - 433
  • [7] Compliant Peg-in-Hole Assembly Using Partial Spiral Force Trajectory With Tilted Peg Posture
    Park, Hyeonjun
    Park, Jaeheung
    Lee, Dong-Hyuk
    Park, Jae-Han
    Bae, Ji-Hun
    IEEE ROBOTICS AND AUTOMATION LETTERS, 2020, 5 (03) : 4447 - 4454
  • [8] Compliant peg-in-hole assembly for nonconvex axisymmetric components based on attractive region in environment
    Liu, Yang
    Chen, Ziyu
    Qiao, Hong
    Gan, Shuai
    ROBOTICA, 2023, 41 (08) : 2314 - 2336
  • [9] Peg-in-hole assembly based on master-slave coordination for a compliant dual-arm robot
    Huang, Yanjiang
    Zheng, Yanglong
    Wang, Nianfeng
    Ota, Jun
    Zhang, Xianmin
    ASSEMBLY AUTOMATION, 2020, 40 (02) : 189 - 198
  • [10] Hybrid Compliant Strategy for Multiple Peg-in-Hole Assembly in Robotic Drain Line Connection
    Shuang, Feng
    Chen, Mingqi
    Guo, Lijuan
    Li, Shaodong
    Lu, Wanyu
    ICARM 2022 - 2022 7th IEEE International Conference on Advanced Robotics and Mechatronics, 2022, : 1110 - 1115
12345