Minimal quantity lubrication in turning: Effect on tool wear

被引：203

作者：

Attanasio, A ^{[1
]}

Gelfi, M ^{[1
]}

Giardini, C ^{[1
]}

Remino, C ^{[1
]}

机构：

[1] Univ Brescia, Dept Mech Engn, I-25123 Brescia, Italy

来源：

WEAR | 2006年 / 260卷 / 03期

关键词：

lubrication; minimal quantity lubrication; SEM analysis; tool life test;

D O I：

10.1016/j.wear.2005.04.024

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Industries and researchers are trying to reduce the use of coolant lubricant fluids in metal cutting to obtain safety, environmental and economical benefits. The aim of this research is to determine if the minimal quantity lubrication (MQL) technique in turning gives some advantages in terms of tool wear reduction. This paper reports the results obtained from turning tests and SEM analysis of tools, at two feed rates and two cutting lengths, using MQL on the rake and flank of the tool. The results obtained show that when MQL is applied to the tool rake, tool life is generally no different from dry conditions, but MQL applied to the tool flank can increase tool life. (c) 2005 Elsevier B.V. All rights reserved.

引用

页码：333 / 338

页数：6

共 9 条

[1] ATTANASIO A, 2004, P 14 INT C TRIB TECH, P1497
[2] BRINKSMEIER E, 1996, P 10 INT C TECHN AK, P23
[3] Advancing cutting technology
Byrne, G
Dornfeld, D
Denkena, B
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2003, 52 (02) : 483 - 507
[4] KENDALL LA, 1998, ASM HDB 18 ASM INTER, V18, P609
[5] Dry cutting
Klocke, F
Eisenblatter, G
[J]. CIRP ANNALS 1997 - MANUFACTURING TECHNOLOGY, VOLUME 46/2/1997: ANNALS OF THE INTERNATIONAL INSTITUTION FOR PRODUCTION ENGINEERING RESEARCH, 1997, : 519 - 526
[6] Klocke F, 1996, WETTBEWERBSFAKTOR PR
[7] *UNI ISO, 1997, 3685 UNI ISO
[8] Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning
Varadarajan, AS
Philip, PK
Ramamoorthy, B
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (02) : 193 - 200
[9] Dry machining and minimum quantity lubrication
Weinert, K
Inasaki, I
Sutherland, JW
Wakabayashi, T
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (02) : 511 - 537

← 1 →