Free-form optics for Fresnel-lens-based photovoltaic concentrators

被引:61
作者
Minano, Juan C. [1 ,2 ]
Benitez, Pablo [1 ,2 ]
Zamora, Pablo [1 ]
Buljan, Marina [1 ]
Mohedano, Ruben [2 ]
Santamaria, Asuncion [1 ]
机构
[1] Univ Politecn Madrid, Cedint, Madrid 28223, Spain
[2] LPI, Altadena, CA 91001 USA
来源
OPTICS EXPRESS | 2013年 / 21卷 / 09期
关键词
DESIGN;
D O I
10.1364/OE.21.00A494
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
The Concentrated Photovoltaics (CPV) promise relies upon the use of high-efficiency triple-junction solar cells (with proven efficiencies of over 44%) and upon high-performance optics that allow for high concentration concurrent with relaxed manufacturing tolerances (all key elements for low-cost mass production). Additionally, uniform illumination is highly desirable for efficiency and reliability reasons. All of these features have to be achieved with inexpensive optics containing only a few (in general no more than 2) optical elements. In this paper we show that the degrees of freedom using free-forms allow the introduction of multiple functionalities required for CPV with just 2 optical elements, one of which is a Fresnel lens. (C) 2013 Optical Society of America
引用
收藏
页码:A494 / A502
页数:9
相关论文
共 47 条
  • [31] Aesthetic Assessment of Free-Form Space Structures Using Machine Learning Based on the Expert's Experiences
    Shahbazi, Yaser
    Ghofrani, Mahsa
    Pedrammehr, Siamak
    [J]. BUILDINGS, 2023, 13 (10)
  • [32] Manifold-based material field series expansion method for topology optimization on free-form surfaces
    Gao, Zhonghao
    Liu, Pai
    Sun, Zhaoyou
    Yang, Kai
    Luo, Yangjun
    [J]. COMPUTATIONAL MECHANICS, 2023, 71 (02) : 237 - 255
  • [33] Compact periscope-type objective based on wedge-shaped prisms with free-form surfaces
    Greisukh, G., I
    Ezhov, E. G.
    Levin, I. A.
    Kazin, S., V
    [J]. JOURNAL OF OPTICAL TECHNOLOGY, 2021, 88 (10) : 553 - 557
  • [34] Integrated optimization method for transonic turbine based on direct free-form deformation and prescreening differential evolutionary optimizer
    Chen, Mingsheng
    Chen, Jiang
    Xiang, Hang
    Liu, Yi
    Guo, Yixuan
    [J]. ENERGY, 2024, 291
  • [35] Free-form surface machining strategy and shape error correction method based on slow tool servo turning
    Yu, Boxin
    Xue, Changxi
    Jia, Mingyu
    Huo, Furong
    [J]. APPLIED OPTICS, 2025, 64 (02) : 359 - 368
  • [36] Energy-aware sub-regional milling method for free-form surface based on clustering features
    Zhao, Junhua
    Li, Lingling
    Li, Congbo
    Sutherland, John W.
    Li, Li
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2022, 84 : 937 - 952
  • [37] Structured triangular mesh generation method for free-form gridshells based on conformal mapping and virtual interaction forces
    Zeng, Qiang
    Ohsaki, Makoto
    Zhang, Jingyao
    Zhu, Shaojun
    Li, Zhengning
    Guo, Xiaonong
    [J]. ENGINEERING STRUCTURES, 2023, 295
  • [38] Shape optimization of free-form grid structures based on the sensitivity hybrid multi-objective evolutionary algorithm
    Wang, Zhicheng
    Cao, Zhenggang
    Fan, Feng
    Sun, Ying
    [J]. JOURNAL OF BUILDING ENGINEERING, 2021, 44
  • [39] Three-DoF Vibration Compensation Platform for Robot-Based Precision Inline Measurements on Free-Form Surfaces
    Wertjanz, Daniel
    Csencsics, Ernst
    Schitter, Georg
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2022, 69 (01) : 613 - 621
  • [40] Sharp bend and large FSR ring resonator based on the free-form curves on a thin-film lithium niobate platform
    Liu, Xingxu
    Ruan, Ziliang
    Sun, Shangsen
    Guo, Changjian
    Chen, Kaixuan
    Zhu, Ning
    Liu, Liu
    [J]. OPTICS EXPRESS, 2024, 32 (06) : 9433 - 9441