Effect of Axial Force on Mechanical and Metallurgical Properties of Friction Stir Welded AA6082 Joints

被引：3
|
作者：
Singh, Gurmeet [1 ]
Singh, Kulwant [1 ]
Singh, Jagtar [1 ]
机构：
[1] St Longowal Inst Engn & Technol, Dept Mech Engn, Sangrur 148006, Punjab, India
来源：
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8 | 2012年 / 383-390卷
关键词：
friction stir welding; aluminum alloy; axial force; mechanical properties; metallurgical properties; WELDING TOOL; ALLOY; ALUMINUM; PARAMETERS;
D O I：
10.4028/www.scientific.net/AMR.383-390.3356
中图分类号：
TP39 [计算机的应用];
学科分类号：
081203 ; 0835 ;
摘要：
In this investigation an attempt has been made to highlight the influence of axial force on the mechanical and metallurgical properties of friction stir welded aluminum alloy AA6082-T651 joints. The axial force is varied from 3 kN to 8 kN on the surface of the base material. Tensile test, macrostructure and microstructure tests were performed on all the welded specimens. SEM was used to know the behavior of the fractured surface of the tensile test specimens. It is found that the joint fabricated at 6 kN axial force has higher tensile strength and good metallurgical properties.
引用
收藏
页码：3356 / 3360
页数：5
相关论文
共 50 条
  • [21] Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints
    Sezhian, M. Vetrivel
    Giridharan, K.
    Pushpanathan, D. Peter
    Chakravarthi, G.
    Stalin, B.
    Karthick, Alagar
    Kumar, P. Manoj
    Bharani, Murugesan
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
  • [22] Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints
    Vetrivel Sezhian, M.
    Giridharan, K.
    Peter Pushpanathan, D.
    Chakravarthi, G.
    Stalin, B.
    Karthick, Alagar
    Manoj Kumar, P.
    Bharani, Murugesan
    Advances in Materials Science and Engineering, 2021, 2021
  • [23] Studies on the effect of welding parameters for friction stir welded AA6082 reinforced with Aluminium Oxide
    Ahmed, Khalique Ejaz
    Nagesh, B. M.
    Raju, B. S.
    Drakshayani, D. N.
    MATERIALS TODAY-PROCEEDINGS, 2020, 20 : 108 - 119
  • [24] Effect of Processing Parameters on Strength and Corrosion Resistance of Friction Stir-Welded AA6082
    Laska, Aleksandra
    Szkodo, Marek
    Koszelow, Damian
    Cavaliere, Pasquale
    METALS, 2022, 12 (02)
  • [25] Effect of FSW process parameters on mechanical properties and microstructure of dissimilar welded joints of AA2024 and AA6082
    Kumar, Ravi
    Salah, A. Nait
    Kant, Neeraj
    Singh, Pushpender
    Hashmi, Abdul Wahab
    Malla, Chandrabhanu
    MATERIALS TODAY-PROCEEDINGS, 2022, 50 : 1435 - 1441
  • [26] Experimental study on mechanical properties of friction stir welded dissimilar joints of Aluminium alloys AA8011-AA6082
    Giridharan K.
    Sevvel P.
    Senthilnathan K.
    Muthukumaran S.
    Padmanabhan S.
    International Journal of Vehicle Structures and Systems, 2019, 11 (02) : 135 - 139
  • [27] The effect of friction stir processing on the friction stir welded AA1050-H14 and AA6082-T6 joints
    Mabuwa, Sipokazi
    Msomi, Velaphi
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 193 - 199
  • [28] Mechanical and metallurgical properties of friction stir welded dissimilar joints of AZ91 magnesium alloy and AA 6082-T6 aluminium alloy
    Sameer, M. D.
    Birru, Anil Kumar
    JOURNAL OF MAGNESIUM AND ALLOYS, 2019, 7 (02) : 264 - 271
  • [29] An investigation of the impact of axial force on friction stir-welded AA5086/AA6063 on microstructure and mechanical properties butt joints
    Ramamoorthi, R.
    Yuvaraj, K. P.
    Gokul, C.
    Eashwar, S. J.
    Arunkumar, N.
    Dheen, S. Abith Tamil
    MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 3159 - 3163
  • [30] Microstructural and mechanical properties of submerged multi-pass friction stir processed AA6082/AA8011 TIG-welded joint
    Msomi, Velaphi
    Mabuwa, Sipokazi
    Merdji, Ali
    Muribwathoho, Oritonda
    Motshwanedi, Sharon S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 5702 - 5705
12345