Cantilever sandwich beams with pyramidal truss cores subjected to tip impact

被引:9
作者
Liu Hua [1 ]
Liu Hu [1 ]
Yang JiaLing [1 ]
Zhao ShouGen [1 ]
机构
[1] Beihang Univ, Sch Aeronaut Sci & Engn, Beijing 100191, Peoples R China
基金
中国国家自然科学基金;
关键词
sandwich beam; pyramidal truss core; impact; plastic; STRUCTURAL PERFORMANCE; LATTICE CORES; PLATES;
D O I
10.1007/s11431-012-5058-4
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Experiments were conducted to investigate the deformation of cantilever sandwich beams with pyramidal truss cores subjected to impact by a projectile at their tips. A new technique was employed to the fabrication of sandwich beams with pyramidal truss cores. For a better observation of large deformation of specimens during impact process, a high-speed digital video camera was successfully used to capture the instant shapes of the deformed beams. A projectile collection device was designed and installed to avoid the projectile flying away from the beam tips after impact and thus the kinetic energy imparted to the beams was measurable. The experiments show that the sandwich beams have a superior shock resistance compared to the monolithic beams of the same material and mass. Further, finite element simulations were performed to gain insight into the deformations and plastic energy absorptions in the sandwich beams.
引用
收藏
页码:181 / 187
页数:7
相关论文
共 18 条
  • [1] Dynamic response of metallic lattice sandwich structures to impulsive loading
    Cui, Xiaodong
    Zhao, Longmao
    Wang, Zhihua
    Zhao, Han
    Fang, Daining
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2012, 43 : 1 - 5
  • [2] Effective properties of the octet-truss lattice material
    Deshpande, VS
    Fleck, NA
    Ashby, MF
    [J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2001, 49 (08) : 1747 - 1769
  • [3] Collapse of truss core sandwich beams in 3-point bending
    Deshpande, VS
    Fleck, NA
    [J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2001, 38 (36-37) : 6275 - 6305
  • [4] Fleck NA, 2004, J APPL MECH, V71, P1
  • [5] Hutchinson RG, 2003, INT J SOLIDS STRUCT, V40, P6969, DOI [10.1016/S0020-7683(03)00348-2, 10.1016/S0020-7693(03)00348-2]
  • [6] Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium
    Kooistra, GW
    Deshpande, VS
    Wadley, HNG
    [J]. ACTA MATERIALIA, 2004, 52 (14) : 4229 - 4237
  • [7] Dynamic failure of metallic pyramidal truss core materials - Experiments and modeling
    Lee, S.
    Barthelat, F.
    Hutchinson, J. W.
    Espinosa, H. D.
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2006, 22 (11) : 2118 - 2145
  • [8] Li YL, 2008, CHINESE J AERONAUT, V21, P512, DOI 10.1016/S1000-9361(08)60168-5
  • [9] Structural modeling of sandwich structures with lightweight cellular cores
    Liu, T.
    Deng, Z. C.
    Lu, T. J.
    [J]. ACTA MECHANICA SINICA, 2007, 23 (05) : 545 - 559
  • [10] Novel strengthening methods for ultralightweight sandwich structures with periodic lattice cores
    Lu TianJian
    Zhang QianCheng
    [J]. SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2010, 53 (03) : 875 - 877