Assembling an endcap to optical fibers by femtosecond laser welding and milling

被引:31
作者
Helie, David [1 ]
Gouin, Samuel [1 ]
Vallee, Real [1 ]
机构
[1] Univ Laval, Ctr Opt Photon & Lasers, Quebec City, PQ G1V 0A6, Canada
基金
加拿大自然科学与工程研究理事会; 加拿大创新基金会;
关键词
FILAMENTATION;
D O I
10.1364/OME.3.001742
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A novel method for assembling endcaps to optical fibers is presented. The method relies on femtosecond laser welding and milling of a glass slide to the polished end of the fiber. The fiber is welded to the glass slide in the cladding region so as to seal the core area without affecting its optical transparency. The same laser is used to mill through the glass slide thereby shaping a microscopic endcap with a diameter slightly larger than that of the fiber. The method was applied to both a standard and a microstructured optical fiber. Preliminary results are also presented on femtosecond laser welding parallel to an interface showing the potential of this approach for optical fiber fusion splicing. (C) 2013 Optical Society of America
引用
收藏
页码:1742 / 1754
页数:13
相关论文
共 21 条
[1]  
Abernethy RB., 2000, NEW WEIBULL HDB
[2]  
ARIEL Y, 2003, Patent No. 20030068150
[3]   End cap splicing of Photonic Crystal Fibers with outstanding quality for high power applications [J].
Boehme, S. ;
Fabian, S. ;
Schreiber, T. ;
Eberhardt, R. ;
Tuennermann, A. .
LASER-BASED MICRO- AND NANOPACKAGING AND ASSEMBLY VI, 2012, 8244
[4]   Laser splicing of end caps - process requirements in high power laser applications [J].
Boehme, S. ;
Beckert, E. ;
Eberhardt, R. ;
Tuennermann, A. .
LASER-BASED MICRO- AND NANOPACKAGING AND ASSEMBLY III, 2009, 7202
[5]   Femtosecond filamentation in transparent media [J].
Couairon, A. ;
Mysyrowicz, A. .
PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS, 2007, 441 (2-4) :47-189
[6]   Sample preparation method for glass welding by ultrashort laser pulses yields higher seam strength [J].
Cvecek, K. ;
Miyamoto, I. ;
Strauss, J. ;
Wolf, M. ;
Frick, T. ;
Schmidt, M. .
APPLIED OPTICS, 2011, 50 (13) :1941-1944
[7]   Femtosecond laser micromachining in transparent materials [J].
Gattass, Rafael R. ;
Mazur, Eric .
NATURE PHOTONICS, 2008, 2 (04) :219-225
[8]   Contact bonding, including direct-bonding in a historical and recent context of materials science and technology, physics and chemistry - Historical review in a broader scope and comparative outlook [J].
Haisma, J ;
Spierings, GACM .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2002, 37 (1-2) :1-60
[9]   Reinforcing a Direct Bond between Optical Materials by Filamentation Based Femtosecond Laser Welding [J].
Helie, David ;
Lacroix, Fabrice ;
Vallee, Real .
JOURNAL OF LASER MICRO NANOENGINEERING, 2012, 7 (03) :284-292
[10]   Reinforced direct bonding of optical materials by femtosecond laser welding [J].
Helie, David ;
Begin, Michael ;
Lacroix, Fabrice ;
Vallee, Real .
APPLIED OPTICS, 2012, 51 (12) :2098-2106