Superplastic forming of corrosion resistance CuZnSn alloys

被引：3
作者：
Matsubara, R
Ashie, N
Nakamura, K
Miura, S
机构：
[1] TOTO Ltd, R&D Ctr, Kokura R&D Div, Kokurakita Ku, Kitakyushu, Fukuoka 8028601, Japan
[2] Kumamoto Inst Technol, Fac Engn, Dept Mech Engn, Kumamoto 8600082, Japan
来源：
TOWARDS INNOVATION IN SUPERPLASTICITY II | 1999年 / 304-3卷
关键词：
grain refinement; ratio of alpha/beta; interphase interfaces sliding;
D O I：
10.4028/www.scientific.net/MSF.304-306.753
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The new commercial Cu-Zn based alloys having excellent hot workability and corrosion resistance were developed. Higher than 200% elongation was observed in the hot tensile test with the alloy sample containing Cu-37.9Zn-1.87Sn-1.91wt%Pb at the temperature range from 500 to 600 degrees C at the initial strain rate of 8.3x10(-4) s(-1). The stress-strain curve showed the typical type of superplastic deformation. The alloy samples were made by the usual method to produce commercial brass. In order to refine the grain size, the temperature of hot extrusion was taken from 530 to 580 degrees C which is lower than the temperature above 700 degrees C generally used. Also the certain ratio of alpha / beta phase was adjusted to increase the sliding between alpha and beta interphase interfaces. The grain size refinement and the ratio of alpha / beta phase adjustment increase the elongation at hot workability range.
引用
收藏
页码：753 / 758
页数：6
相关论文
共 50 条
[1]   Development of superplastic AlCuAgMgZr alloys for easy forming [J].
Dutkiewicz, J ;
Kusnierz, J ;
Nieh, TG .
SUPERPLASTICITY IN ADVANCED MATERIALS, ICSAM-2000, 2001, 357-3 :111-116
[2]   Grain refinement of commercial magnesium alloys for high-strain-rate-superplastic forming [J].
Mukai, T ;
Watanabe, H ;
Higashi, K .
MAGNESIUM ALLOYS 2000, 2000, 350-3 :159-170
[3]   Numerical simulation of superplastic forming of a magnesium alloy part [J].
Jin, Q. L. ;
Zeng, Z. R. ;
Zhang, Y. S. .
SUPERPLASTICITY IN ADVANCED MATERIALS, 2007, 551-552 :263-+
[4]   Effects of Zn content on surface deformability and corrosion resistance of MgZnMnCa alloys [J].
Fernandes, Marcio Teodoro ;
da Silva, Leonardo Martins ;
de Freitas, Bruno Xavier ;
Domingues, Glaucia ;
de Castro, Jose Adilson ;
dos Santos, Claudinei .
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2020, 111 (06) :511-518
[5]   Effect of overageing temperature on the superplastic behaviour in magnesium alloys [J].
Wesling, V. ;
Ryspaev, T. ;
Schram, A. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 462 (1-2) :144-148
[6]   Possibility of applying superplastic forging to the micro forming of SUS304 [J].
Katoh, Masahito ;
Torisaka, Yasitnori .
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2008, 94 (05) :160-163
[7]   The Mechanical Properties and Corrosion Resistance of Magnesium Alloys with Different Alloying Elements for Bone Repair [J].
Lin, Guangyi ;
Chen, Minfang ;
Zhao, Yun ;
Sasikumar, Yesudass ;
Tie, Di .
CRYSTALS, 2018, 8 (07)
[8]   Deformation processing, recrystallization and grain boundaries in superplastic aluminum alloys [J].
McNelley, TR ;
Swisher, DL .
SUPERPLASTICITY IN ADVANCED MATERIALS, 2003, 447-4 :373-379
[9]   Principles of grain refinement and superplastic flow in magnesium alloys processed by ECAP [J].
Figueiredo, Roberto B. ;
Langdon, Terence G. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 501 (1-2) :105-114
[10]   The control of grain size particles in grain boundary for superplastic aluminum alloys [J].
Yoshida, H .
GRAIN GROWTH IN POLYCRYSTALLINE MATERIALS II, PTS 1 AND 2, 1996, 204- :657-665
12345