A SiC based Two-Stage Pulsed Power Converter System for Laser Diode Driving Applications

被引：2

作者：

Kokkonda, Raj Kumar ^{[1
]}

Bhattacharya, Subhashish ^{[1
]}

Veliadis, Victor ^{[1
]}

Panayiotou, Chrysanthos ^{[2
]}

机构：

[1] North Carolina State Univ, FREEDM Syst Ctr, Raleigh, NC 27695 USA

[2] Indian River State Coll, LASER TEC, Ft Pierce, FL USA

来源：

2022 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE) | 2022年

关键词：

Laser diode driver; Pulse power; Capacitor charging; Pulse current source; Buck current regulator; Inductor energy recovery; Hysteresis current control; SiC; DRIVER;

D O I：

10.1109/ECCE50734.2022.9947820

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

This paper discusses the unique driving requirements of a laser diode array and evaluates potential converter configurations to meet those requirements. A two-stage capacitive energy storage based pulsed power converter system consisting of a phase shifted full bridge (PSFB) based capacitor charging power supply (CCPS) and a buck based pulse current source with inductor energy recovery has been adopted. Buck based pulse current source with inductor energy recovery enabled by SiC FETs allows significant reduction in energy loss and required energy storage capacitance when compared to conventionally used linear current regulator. A reconfigured pulse forming circuit has been proposed for the pulse current source which mitigates the effect of the output parasitic inductance on the laser diode without the need for an additional freewheeling diode across the load. A pulsed laser diode driver capable of driving 280 V laser diode arrays at 56 kW peak pulse power has been designed and a full-scale hardware prototype has been built. The complete system has been experimentally validated by generating 50 A current pulses at 250 V output voltage (12.5 kW) which proves the feasibility of the proposed converter configuration for high pulse power laser diode driving applications.

引用

页数：8

共 17 条

[1] Abe S, 2017, INT C POWER ELECT DR, P1147, DOI 10.1109/PEDS.2017.8289197
[2] Analysis and Design Considerations of Input Parallel Output Series-Phase Shifted Full Bridge Converter for a High-Voltage Capacitor Charging Power Supply
Agarwal, Apoory
Prabowo, Yos
Bhattacharya, Subhashish
[J]. 2021 IEEE 12TH ENERGY CONVERSION CONGRESS AND EXPOSITION - ASIA (ECCE ASIA), 2021, : 1068 - 1075
[3] Chen FZ, 2017, 2017 IEEE 3RD INTERNATIONAL FUTURE ENERGY ELECTRONICS CONFERENCE AND ECCE ASIA (IFEEC 2017-ECCE ASIA), P1878, DOI 10.1109/IFEEC.2017.7992335
[4] Chen J, 2021, I C FIELD PROG LOGIC, P1, DOI [10.1109/FPL53798.2021.00009, 10.1109/ICME51207.2021.9428404]
[5] Deri RJ, 2014, IEEE PHOTON CONF, P236, DOI 10.1109/IPCon.2014.6995335
[6] Kleine K, 2017, HIGH POWER DIODE LAS, P3, DOI 10.1109/HPD.2017.8261076
[7] Temperature Rise of Metallized Film Capacitors in Repetitive Pulse Applications
Li, Zhiwei
Li, Hua
Huang, Xiang
Li, Haoyuan
Wang, Wenjuan
Wang, Bowen
Lin, Fuchang
Zhang, Qin
[J]. IEEE TRANSACTIONS ON PLASMA SCIENCE, 2015, 43 (06) : 2038 - 2045
[8] Maestri S., 2013, 2013 15 EUR C POW EL, P1
[9] Neice M., 2007, 2007 C LAS EL CLEO, P1
[10] SABATE JA, 1990, APPL POWER ELECT CO, P275, DOI 10.1109/APEC.1990.66420

← 1 2 →