Corrosion Studies of Low-Alloyed FeCrAl Steels in Liquid Lead at 750°C

被引：21
|
作者：
Domstedt, Peter [1 ]
Lundberg, Mats [1 ,2 ]
Szakalos, Peter [1 ]
机构：
[1] KTH Royal Inst Technol, Drottning Kristinas Vag 51, S-10044 Stockholm, Sweden
[2] Sandvik Mat Technol AB, S-81118 Sandviken, Sweden
来源：
OXIDATION OF METALS | 2019年 / 91卷 / 3-4期
基金：
欧盟地平线“2020”;
关键词：
FeCrAl; CSP; Liquid lead; High-temperature corrosion; OXIDE SCALE FORMATION; STRUCTURAL-MATERIALS; STAINLESS-STEELS; OXIDATION; OXYGEN; AL; RESISTANCE; STRENGTH;
D O I：
10.1007/s11085-019-09896-z
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
New ductile experimental FeCrAl alloys, based on the composition of Fe-10Cr-4Al, were exposed to stagnant liquid lead at 750 degrees C for up to 1970h. Two exposures with different test conditions were performed: one with addition of oxygen (as H2O) to the liquid lead and one without. The experimental alloys showed generally good oxidation and self-healing properties. The exposures showed that this specific category of steels has the potential to operate in liquid lead at very high temperatures with only minor oxidation. With this new material development, new energy technologies such as the CSP plants may be able to utilize liquid lead at very high temperatures as heat transfer fluid, thus achieving increased thermal efficiency.
引用
收藏
页码：511 / 524
页数：14
相关论文
共 50 条
  • [21] Mossbauer study of the annealing effect on low-alloyed steels
    Bentayeb, FZ
    Bouzabata, B
    Alleg, S
    HYPERFINE INTERACTIONS, 2000, 128 (04): : 375 - 380
  • [22] The modeling of retained austenite in low-alloyed TRIP steels
    Reisner, G
    Werner, EA
    Kerschbaummayr, P
    Papst, I
    Fischer, FD
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1997, 49 (09): : 62 - &
  • [23] Austenitic Surfacing on Unalloyed or Low-Alloyed Steels.
    Mueller, Ralf
    Schweisstechnik (Berlin), 1973, 23 (07): : 289 - 293
  • [24] Technological Features of Vacuum Carburizing of Low-Alloyed Steels
    A. E. Smirnov
    R. S. Fakhurtdinov
    M. Yu. Ryzhova
    S. A. Pakhomova
    Journal of Machinery Manufacture and Reliability, 2019, 48 : 167 - 172
  • [25] ACCELERATED CARBIDE SPHEROIDISATION (ASR) IN LOW-ALLOYED STEELS
    Dlouhy, Jaromir
    Hauserova, Daniela
    Novy, Zbysek
    21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012), 2012, : 539 - 544
  • [26] Sulphidation of Low-Alloyed Steels Used in Power Industry
    T. Dudziak
    K. Jura
    P. Dudek
    L. Boroń
    J. Rutkowska
    Oxidation of Metals, 2019, 92 : 379 - 399
  • [27] Kelvin probe measurement of corrosion potential of low-alloyed steels and the thickness of electrolyte layer during cyclic corrosion condition
    Nippon Steel Corp, Japan
    Zairyo to Kankyo/ Corrosion Engineering, 1998, 47 (06): : 406 - 410
  • [28] PRECIPITATION KINETICS OF OVERCOOLED NITROGENIZED AUSTENITE OF LOW-ALLOYED STEELS
    MILOVANOVA, OA
    DUDAREV, VV
    BABENKO, NP
    GOLIKOV, VA
    TYAPKIN, YD
    FIZIKA METALLOV I METALLOVEDENIE, 1990, (08): : 178 - 184
  • [29] ON MECHANISM OF CALCIUM INFLUENCE ON COLD BRITTLENESS OF LOW-ALLOYED STEELS
    BRODETSKIY, IL
    BELOV, BF
    POZNYAK, LA
    TREFILOV, VI
    TROTSAN, AI
    FIZIKA METALLOV I METALLOVEDENIE, 1988, 65 (01): : 152 - 158
  • [30] Methods of improvement of exploitation features of carbon and low-alloyed steels
    Borisova, L. G.
    INNOVATIONS AND PROSPECTS OF DEVELOPMENT OF MINING MACHINERY AND ELECTRICAL ENGINEERING, 2017, 87
12345