Impact response of Napier fibre reinforced nanomodified epoxy composites

被引：0
|
作者：
Ramli, W. M. A. Wan [1 ]
Majid, M. S. Abdul [1 ]
Ridzuan, M. J. M. [1 ]
Amin, N. A. M. [1 ]
机构：
[1] Univ Malaysia Perlis, Sch Mechatron Engn, Mech Engn Programme, Pauh Putra Campus, Arau 02600, Perlis, Malaysia
来源：
6TH INTERNATIONAL CONFERENCE ON APPLICATIONS AND DESIGN IN MECHANICAL ENGINEERING | 2019年 / 670卷
关键词：
Composites; nanoclay; alkali treatment; impact properties; natural fibre;
D O I：
10.1088/1757-899X/670/1/012050
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effects of nanoclay filler content on the impact properties of Napier fibre reinforced epoxy composites were investigated. The natural fibre based composites were fabricated using either untreated or 5% alkali-treated Napier fibre along with nanomodified epoxy resin which consists of various nanoclay filler contents which were 0, 3, 5 and 10 wt%. The composites were manufactured using cold compression moulding process. Morphological analysis was then conducted to further analyse the fractured specimens following the impact test. The maximum impact properties were recorded by the treated Napier fibre reinforced nanomodified epoxy with 3 wt% of nanoclay filler content. The SEM image of the Napier fibre reinforced nanomodified epoxy composites at the optimal nanofiller content also exhibited excellent interfacial adhesion between the epoxy matrix and the fibre reinforcement.
引用
收藏
页数：5
相关论文
共 50 条
  • [11] Wear, morphological and thermal behavior of flax fibre reinforced epoxy composites
    Kumar, S. M. Vinu
    Singh, Harwinder
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2023, 48 (03) : 326 - 335
  • [12] Fabrication and Properties of Recycled Cellulose Fibre-Reinforced Epoxy Composites
    Low, I. M.
    Somers, J.
    Kho, H. S.
    Davies, I. J.
    Latella, B. A.
    COMPOSITE INTERFACES, 2009, 16 (7-9) : 659 - 669
  • [13] The effect of fibre treatment on water absorption and mechanical properties of burl palm (Corypha utan) fibre reinforced epoxy composites
    Zalinawati, M.
    Siregar, J. P.
    Tezara, C.
    Jaafar, J.
    Sazali, N.
    Oumer, A. N.
    Hamdan, M. H. M.
    JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2020, 14 (04) : 7379 - 7388
  • [14] Influence of Fibre Length on the Wear Behaviour of Chopped Agave americana Fibre Reinforced Epoxy Composites
    Mylsamy, K.
    Rajendran, I.
    TRIBOLOGY LETTERS, 2011, 44 (01) : 75 - 80
  • [15] Influence of Fibre Length on the Wear Behaviour of Chopped Agave americana Fibre Reinforced Epoxy Composites
    K. Mylsamy
    I. Rajendran
    Tribology Letters, 2011, 44 : 75 - 80
  • [16] Tribological Studies of Bamboo Fibre Reinforced Epoxy Composites Using a BOD Technique
    Alajmi, Ayedh Eid
    Alotaibi, Jasem Gh
    Yousif, B. F.
    Nirmal, Umar
    POLYMERS, 2021, 13 (15)
  • [17] Mechanical properties of double and triple fibre-reinforced epoxy hybrid composites
    Boztoprak, Yalcin
    EMERGING MATERIALS RESEARCH, 2020, 9 (03) : 906 - 912
  • [18] Impact response of hybrid carbon/glass fibre reinforced polymer composites designed for engineering applications
    Hung, Pui-yan
    Lau, Kin-tak
    Cheng, Lai-kwan
    Leng, Jinsong
    Hui, David
    COMPOSITES PART B-ENGINEERING, 2018, 133 : 86 - 90
  • [19] Comparison of carbon fibre/epoxy composites reinforced by short aramid and carbon fibres
    Walker, L
    Hu, XZ
    SCRIPTA MATERIALIA, 1999, 41 (06) : 575 - 582
  • [20] The low velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites
    Dhakal, H. N.
    Zhang, Z. Y.
    Richardson, M. O. W.
    Errajhi, O. A. Z.
    COMPOSITE STRUCTURES, 2007, 81 (04) : 559 - 567
12345