The effect of phenolic regrind on the mechanical properties of HDPE

被引：0

作者：

Ohlsson, L ^{[1
]}

机构：

[1] Univ Wisconsin, Dept Ind Studies, Platteville, WI 53818 USA

来源：

ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS; | 1999年

关键词：

D O I：

暂无

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The possibility for recycling cured phenolic material was evaluated by testing mechanical properties of High-Density Polyethylene (HDPE) containing phenolic regrind material. The mechanical properties evaluated were: modulus of elasticity, percent elongation, tensile strength, and impact strength. Four different levels of phenolic regrind were used for evaluation with four different levels(4.76, 9.09, 16.7%) of phenolic regrind used in the comparison. The results demonstrated that with higher levels of phenolic regrind in the base HDPE material, certain mechanical properties degraded, with increased brittleness the most apparent effect.

引用

页码：3740 / 3744

页数：5