Development of robot system for sensor adjustment in ICF research

被引：0

作者：

Li, Changfeng ^{[1
]}

Sun, Lining ^{[1
]}

Qu, Dongsheng ^{[1
]}

Liu, Yanwu ^{[1
]}

机构：

[1] Harbin Univ Inst Technol, Inst Robot, Harbin, Hei Longjiang, Peoples R China

来源：

IEEE ICMA 2006: PROCEEDING OF THE 2006 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS | 2006年

关键词：

ICF; parallel robot; macro-micro control; network control;

D O I：

暂无

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

A macro-micro robot system is developed to satisfy the requirement of the high-precision pose adjustment and large-travel of the sensor in ICF research. In micro-motion design, six degree-of-freedom parallel robot with hooke joint is taken to meet the large load and acquire reasonable accuracy. And close-loop control method and proper planning for the velocity of motor are necessary to guarantee the orientating precision and repetitive accuracy of the system. The transmission type with ballscrew is a good choice to meet large-travel in macro-motion design. Network control of the robot system is realized through the network communication between the server and the client. The results of experiment show that the robot system developed can well realized the accurate pose adjustment of the sensor and satisfied design requirement of the sensor adjustment.

引用

页码：2048 / +

页数：2

共 8 条

[1]

HE XS, 2000, CHINESE J NUCL SCI E, V20, P248

[2]

Lee SH, 2001, IROS 2001: PROCEEDINGS OF THE 2001 IEEE/RJS INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS, VOLS 1-4, P2184, DOI 10.1109/IROS.2001.976394

[3] On the development of a real time control system by using xPC target: Solution to robotic system control [J].

Low, KH ;

Wang, H ;

Wang, MY .

2005 IEEE INTERNATIONAL CONFERENCE ON AUTOMATION SCIENCE AND ENGINEERING (CASE), 2005, :345-350

[4] Control system design with on-line planning for a desired signal and its application to robot manipulators [J].

Matsushita, A ;

Tsuchiya, T .

IEEE-ASME TRANSACTIONS ON MECHATRONICS, 1998, 3 (02) :149-152

[5]

Merlet JP, 2005, IEEE INT CONF ROBOT, P942

[6]

YAN Z, 2002, ROBOT, V24, P276

[7]

ZHANG XF, 2004, HIGH TECHNOLOGY NOV, P63

[8]

ZHEN H, 1997, THEORY MECH CONTROL

← 1 →