Proportional damping approximation for structures with added viscoelastic dampers

被引:34
作者
Bilbao, A [1 ]
Avilés, R
Agirrebeitia, J
Ajuria, G
机构
[1] Adv Design & Anal Idom, Engn & Consultancy, Bilbao 48014, Spain
[2] Escuela Ingenieros Bilbao, Dept Mech Engn, Bilbao 48013, Spain
关键词
viscoelastic dampers; non-proportional damping; finite element analysis; modal energy method; dissipated energies method; Caughey damping matrix;
D O I
10.1016/j.finel.2005.10.001
中图分类号
O29 [应用数学];
学科分类号
070104 ;
摘要
Installation of viscoelastic dampers in structures is one of the most widely used ways of enhancing structural performance against dynamic loads. Finite element dynamic analysis of structures with added viscoelastic dampers can be computationally costly. In general, to cope with non-proportional damping either complex modes or direct integration must be used, and neither of these two methods is free of complicated or time-consuming numerical procedures. This paper describes two efficient alternative methods to calculate some approximate proportional damping in order to simplify dynamic analyses and achieve reductions in computation times. Both methods approximate the effects of the added viscoelastic dampers with a damping matrix in the form of a generalised Rayleigh damping matrix as proposed by Caughey, which can be diagonalised through a modal transformation using real modes. This enables the use of modal superposition techniques with real modes to solve dynamic analyses. The accuracy and limitations of the proposed methods are later verified through case studies on a sample structure. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:492 / 502
页数:11
相关论文
共 29 条
[1]   Rates of change of eigenvalues and eigenvectors in damped dynamic system [J].
Adhikari, S .
AIAA JOURNAL, 1999, 37 (11) :1452-1458
[2]   Optimal complex modes and an index of damping non-proportionality [J].
Adhikari, S .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2004, 18 (01) :1-27
[3]   A procedure based on finite elements for the solution of nonlinear problems in the kinematic analysis of mechanisms [J].
Aviles, R ;
Ajuria, MBG ;
Hormaza, MV ;
Hernandez, A .
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 1996, 22 (04) :305-327
[4]  
Aviles R, 1998, COMMUN NUMER METH EN, V14, P463, DOI 10.1002/(SICI)1099-0887(199805)14:5<463::AID-CNM165>3.0.CO
[5]  
2-W
[6]  
CHANG KC, 1995, J STRUCT ENG-ASCE, V24, P1217
[7]   OPTIMAL PLACEMENT OF ACTIVE PASSIVE MEMBERS IN TRUSS STRUCTURES USING SIMULATED ANNEALING [J].
CHEN, GS ;
BRUNO, RJ ;
SALAMA, M .
AIAA JOURNAL, 1991, 29 (08) :1327-1334
[8]  
Coughey TK, 1960, J APPL MECH, V27, P269, DOI DOI 10.1115/1.3643949
[9]   PLACING ACTUATORS ON SPACE STRUCTURES BY GENETIC ALGORITHMS AND EFFECTIVENESS INDEXES [J].
FURUYA, H ;
HAFTKA, RT .
STRUCTURAL OPTIMIZATION, 1995, 9 (02) :69-75
[10]  
Hurty W. C., 1964, DYNAMICS STRUCTURES, P313