Phosphorus recovery from aqueous solution via a microbial electrolysis phosphorus-recovery cell

The coming global phosphorus (P) crisis makes P recovery from wastewater become an inevitable choice. Hydroxyapatite (HAP) crystallization is an important approach for P recovery, but its requirements for high alkali and acid are unaffordable. Thus, a microbial electrolysis phosphorus-recovery cell (MEPRC) was developed to cut down the alkali cost via raising the wastewater pH (over 11) in the cathode chamber, and the acid cost via producing acid in the acid-production chamber. HAP was confirmed to be the final recovered products, and P recovery efficiency over 80% was achieved at 24-h operation. To optimize the P recovery performance of this system, the effects of the key factors including applied voltage, P initial concentration and Ca/P ration were investigated. High voltage could promote the rate of P recovery but had slight effect on the eventual recovery efficiency (elevated from 88.5 to 91.1%). High P initial concentration (15.0 mM) could slow down the pH elevation, contributing to the low P recovery efficiency (50.1%) within 24 h. However, prolonging the operation could break the buffering and obtain a satisfactory P recovery efficiency (87.2%) at 36 h. Besides, sufficient calcium ions were favorable to the P recovery. In addition, P recovery cost analyses of the MEPRC indicated that it might be a low-cost technology for P recovery. Moreover, the simultaneously produced acid could be used to neutralize the effluent after P recovery with high pH value. These results demonstrate the feasibility of MEPRC for cost-effective P recovery from wastewater. (C) 2020 Elsevier Ltd. All rights reserved.