Quantifying progressive pre-peak brittle fracture damage in rock during uniaxial compression

This paper presents the findings of an extensive laboratory investigation into the identification and quantification of stress-induced brittle fracture damage in rock. By integrating the use of strain gauge measurements and acoustic emission monitoring, a rigorous methodology has been developed to aid in the identification and characterization of brittle fracture processes induced through uniaxial compressive loading. Results derived from monocyclic loading tests demonstrate that damage and the subsequent deformation characteristics of the damaged rock can be easily quantified by normalizing the stresses and strains observed in progression from one stage of crack development to another. Results of this analysis show that the crack initiation, sigma(ci), and crack damage, sigma(cd), thresholds for pink Lac du Bonnet granite occur at 0.39 sigma(UCS) and 0.75 sigma(UCS) respectively. Acoustic emissions from these tests were found to provide a direct measure of the rapid release of energy associated with damage-related mechanisms. Simplified models describing the loss of cohesion and the subsequent development of microfractures leading up to unstable crack propagation were derived using normalized acoustic emission rates. Damage-controlled cyclic loading tests were subsequently used to examine the effects of accumulating fracture damage and its influence on altering the deformation characteristics of the rock. These tests revealed that two distinct failure processes involving the progressive development of the microfracture network, may occur depending on whether the applied cyclic loads exceed or are restrained by the crack damage stress threshold. (C) 1999 Elsevier Science Ltd. All rights reserved.