Grain boundary character distribution and texture evolution in cold-drawn Ti-45Nb wires

被引：21

作者：

Chen, Yi ^{[1
]}

Li, Jinshan ^{[1
]}

Tang, Bin ^{[1
]}

Kou, Hongchao ^{[1
]}

Zhang, Fengshou ^{[2
]}

Chang, Hui ^{[1
]}

Zhou, Lian ^{[1
]}

机构：

[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China

[2] Western Superconducting Technol Co Ltd, Xian 710018, Peoples R China

来源：

MATERIALS LETTERS | 2013年 / 98卷

关键词：

Heavy cold-drawn; Texture; Grain boundaries; Ti-45Nb wires; HIGH-ANGLE BOUNDARIES; MICROSTRUCTURAL EVOLUTION; STEEL; DEFORMATION; SUBDIVISION;

D O I：

10.1016/j.matlet.2013.02.043

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Grain boundary character distribution and texture evolution of Ti-45Nb wires were investigated during the cold-drawn process. The results revealed that the fiber microstructure formed along drawing direction after cold-drawn process. The < 110 > fiber texture formed and the intensity enhanced by increasing the strain from 90% to 98% during the cold-drawn process. A large amount of high angle grain boundaries (HAGB) occurred at a large strain state of 90%, which was resulted from the rotation of the initial beta grains. By increasing the strain to 98%, the fraction of low angle grain boundaries (LAGB) increased remarkably by the formation of the subdivided grains. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：254 / 257

页数：4

共 13 条

[1] Texture and anisotropy of a hot rolled Ti-16Nb alloy
Banumathy, S.
Mandal, R. K.
Singh, A. K.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 500 (02) : L26 - L30
[2] Microstructure evolution in dual-phase stainless steel during severe deformation
Belyakov, A
Kimura, Y
Tsuzaki, K
[J]. ACTA MATERIALIA, 2006, 54 (09) : 2521 - 2532
[3] Microstructural evolution and ductility improvement of a Ti-30Nb alloy with Pd addition
Cui, C. Y.
Ping, D. H.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 471 (1-2) : 248 - 252
[4] High angle boundaries formed by grain subdivision mechanisms
Hughes, DA
Hansen, N
[J]. ACTA MATERIALIA, 1997, 45 (09) : 3871 - 3886
[5] HIGH-ANGLE BOUNDARIES AND ORIENTATION DISTRIBUTIONS AT LARGE STRAINS
HUGHES, DA
HANSEN, N
[J]. SCRIPTA METALLURGICA ET MATERIALIA, 1995, 33 (02): : 315 - 321
[6] Effect of redundant shear strain on microstructure and texture evolution during accumulative roll-bonding in ultralow carbon IF steel
Kamikawa, N.
Sakai, T.
Tsuji, N.
[J]. ACTA MATERIALIA, 2007, 55 (17) : 5873 - 5888
[7] Microstructure development and texture evolution of ME20 sheets processed by accumulative roll bonding
Li, X.
Al-Samman, T.
Gottstein, G.
[J]. MATERIALS LETTERS, 2011, 65 (12) : 1907 - 1910
[8] Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis
Mishra, A.
Kad, B. K.
Gregori, F.
Meyers, M. A.
[J]. ACTA MATERIALIA, 2007, 55 (01) : 13 - 28
[9] Effects of severe cold rolling on the texture and grain boundary character of a Ti-NbIF steel
Saha, Rajib
Ray, R. K.
[J]. MATERIALS LETTERS, 2008, 62 (02) : 222 - 225
[10] Development of Texture, Microstructure, and Grain Boundary Character Distribution in a High-Strength Boron-Added Interstitial-Free Steel after Severe Cold Rolling and Annealing
Saha, Rajib
Ray, R. K.
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (09): : 2160 - 2170

← 1 2 →