Mechanical Properties of Geopolymer Concretes Reinforced with Waste Steel Fibers

被引：9

作者：

Gailitis, R. ^{[2
]}

Korniejenko, K. ^{[1
]}

Lach, M. ^{[1
]}

Sliseris, J. ^{[2
]}

Moran, J. ^{[3
]}

Rodriguez, E. ^{[3
]}

Mikula, J. ^{[1
]}

机构：

[1] Cracow Univ Technol, Fac Mech Engn, Inst Mat Engn, Jana Pawla II 37, PL-31864 Krakow, Poland

[2] Riga Tech Univ, Fac Civil Engn, 1 Kalku St, LV-1658 Riga, Latvia

[3] UNMDdP Conicet, Fac Ingn, Area Mat Compuestos Estruct CET, Inst Invest Ciencia Tecnol Mat INTEMA, Diagonal JB Alberdi 2695, RA-7600 Mar Del Plata, Argentina

来源：

4TH INTERNATIONAL CONFERENCE ON INNOVATIVE MATERIALS, STRUCTURES AND TECHNOLOGIES (IMST 2019) | 2019年 / 660卷

关键词：

FLY-ASH; BEHAVIOR;

D O I：

10.1088/1757-899X/660/1/012007

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The article presents the research that try to determinate the possibilities of utilization the waste came from used tires to create the composites based on geopolymer matrix. The tire is multicomponent construction. It mainly consists of elastomer (rubber), metal and textile fibres such called textile cord. A lot of components causes difficulties in the tire recycling process. The main aim of the research was determinate the possibilities of recycling the waste steel from used tires in geopolymer composites and develop the eco-friendly material for construction industry. The matrix based on fly ash from power station located in city named Skawina (Poland) and fine sand at a ratio of 1:1. The process of activation was made by 10M sodium hydroxide solution combined with the sodium silicate solution. In order to manufacture these composites the addition of 2% and 3.5% of waste steel fibres by mass was applied. Also specimen without steel fiber reinforcement were made to get reference specimens. The waste steel fibres came from recycling company from Argentina 'Regomax'. The specimens were prepared according to the methodology described in the standard EN 12390-1. The research methods used were: microstructure research, tensile strength and compressive strength tests as well as analysis of breakthroughs

引用

页数：8

共 15 条

[1] High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers [J].

Celik, Abdullah ;

Yilmaz, Kemalettin ;

Canpolat, Orhan ;

Al-Mashhadani, Mukhallad M. ;

Aygormez, Yurdakul ;

Uysal, Mucteba .

CONSTRUCTION AND BUILDING MATERIALS, 2018, 187 :1190-1203

[2]

ETRMA, 2017, 2017 EUR TYR RUBB IN

[3] Evaluation of the mechanical properties of sea sand-based geopolymer concrete and the corrosion of embedded steel bar [J].

Khoa Tan Nguyen ;

Le, Tuan Anh ;

Lee, Kihak .

CONSTRUCTION AND BUILDING MATERIALS, 2018, 169 :462-472

[4] The mechanical properties of flax and hemp fibres reinforced geopolymer composites [J].

Korniejenko, K. ;

Lach, M. ;

Hebdowska-Krupa, M. ;

Mikula, J. .

INTERNATIONAL CONFERENCE BUILDING MATERIALS, PRODUCTS AND TECHNOLOGIES, 2018, 379

[5] Design of fly ash geopolymer concrete mix proportions using Multivariate Adaptive Regression Spline model [J].

Lokuge, Weena ;

Wilson, Aaron ;

Gunasekara, Chamila ;

Law, David W. ;

Setunge, Sujeeva .

CONSTRUCTION AND BUILDING MATERIALS, 2018, 166 :472-481

[6] Carbon fiber waste incorporation in blast furnace slag geopolymer-composites [J].

Luna-Galiano, Y. ;

Leiva, C. ;

Villegas, R. ;

Arroyo, F. ;

Vilches, L. ;

Fernandez-Pereira, C. .

MATERIALS LETTERS, 2018, 233 :1-3

[7] Reclaiming waste tire rubber by an irradiation technique [J].

Molanorouzi, Mahdieh ;

Mohaved, Saeed Ostad .

POLYMER DEGRADATION AND STABILITY, 2016, 128 :115-125

[8] Fiber reinforced geopolymer from synergetic utilization of fly ash and waste tire [J].

Mucsi, Gabor ;

Szenczi, Agnes ;

Nagy, Sandor .

JOURNAL OF CLEANER PRODUCTION, 2018, 178 :429-440

[9] Behaviour of concrete with a disperse reinforcement under dynamic loads [J].

Nikolenko S.D. ;

Sushko E.A. ;

Sazonova S.A. ;

Odnolko A.A. ;

Manokhin V.Ya. .

Magazine of Civil Engineering, 2017, 75 (07) :3-14

[10] Effective mechanical reinforcement of inorganic polymers using glass fibre waste [J].

Novais, Rui M. ;

Carvalheiras, J. ;

Seabra, M. P. ;

Pullar, R. C. ;

Labrincha, J. A. .

JOURNAL OF CLEANER PRODUCTION, 2017, 166 :343-349

← 1 2 →