Fatigue damage prediction of metro bogie frame based on measured loads

被引：14
|
作者：
Wang, B. J. [1 ]
Xie, S. Q. [1 ]
Li, Q. [1 ]
Ren, Z. S. [1 ]
机构：
[1] Beijing Jiaotong Univ, Sch Mech Elect & Control Engn, Beijing 100044, Peoples R China
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2022年 / 154卷
基金：
中国国家自然科学基金;
关键词：
Bogie frame; Load condition; Fatigue damage; Modal frequency; Equivalent stress amplitude; NON-STATIONARITY; VIBRATION;
D O I：
10.1016/j.ijfatigue.2021.106532
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The loads for bogie frame fatigue damage prediction under service environment has become a critical priority. In this study, the completeness of the measured loads was verified and bogie loads were classified into quasi-static and dynamic regions. Bogie modal vibration and rail corrugation were studied to adjust the loads. The predicted fatigue damage was closer to the actual damage and covered the measured damage. The results of this study showed that the service loads of existing frames and their characteristics can be used to predict the damage suffered by similar type of frames under similar application conditions.
引用
收藏
页数：13
相关论文
共 50 条
  • [41] Data-driven prediction and interpretation of fatigue damage in a road-rail suspension bridge considering multiple loads
    Sun, Zhen
    Santos, Joao
    Caetano, Elsa
    STRUCTURAL CONTROL & HEALTH MONITORING, 2022, 29 (09)
  • [42] Influence of Rail Corrugation on Fatigue Life of Bogie Frame of High-Speed EMU
    Zhang, Baoan
    Zheng, Jing
    Yu, Dalian
    Zhang, Jimin
    Zhou, Hechao
    Liang, Xin
    Qu, Wenqiang
    ADVANCES IN DYNAMICS OF VEHICLES ON ROADS AND TRACKS, IAVSD 2019, 2020, : 245 - 251
  • [43] Multiobjective Optimization of Beam Structure for Bogie Frame Considering Fatigue-Life Extension
    Baek, Seokheum
    Song, Xueguan
    Kim, Myungil
    Kim, Jaesung
    JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, 2021, 16 (03) : 1709 - 1719
  • [44] Multiobjective Optimization of Beam Structure for Bogie Frame Considering Fatigue-Life Extension
    Seokheum Baek
    Xueguan Song
    Myungil Kim
    Jaesung Kim
    Journal of Electrical Engineering & Technology, 2021, 16 : 1709 - 1719
  • [45] Fatigue strength and residual stress evaluation of repair welding of bogie frame for railway vehicles
    Seo, Jung-Won
    Kwon, Seok-Jin
    Lee, Chan-Woo
    Lee, Dong-Hyeong
    Goo, Byeong-Choon
    ENGINEERING FAILURE ANALYSIS, 2021, 119
  • [46] Fatigue assessment of tilting bogie frame for Korean tilting train: Analysis and static tests
    Kim, Jung-Seok
    ENGINEERING FAILURE ANALYSIS, 2006, 13 (08) : 1326 - 1337
  • [47] Track structure influence analysis on metro bogie frame dynamic stress with a rigid-flexible coupled model
    Luo, Wei
    Wang, Binjie
    Wang, Wenjing
    Li, Qiang
    Liu, Xu
    ENGINEERING FAILURE ANALYSIS, 2025, 171
  • [48] Fatigue strength evaluation of a bogie frame for urban maglev train with fatigue test on full-scale test rig
    Han, Jeong-Woo
    Kim, Jae-Dong
    Song, See-Yeob
    ENGINEERING FAILURE ANALYSIS, 2013, 31 : 412 - 420
  • [49] The experiment study for fatigue strength of bogie frame of beijing subway vehicle under overload situation
    Li, Jishan
    Wang, Jinhai
    Li, Xi
    Yang, Jianwei
    Wang, Haitao
    Open Mechanical Engineering Journal, 2015, 9 (01): : 260 - 265
  • [50] Research on Fatigue Life of Bogie Frame of Urban Mass Transit Vehicle under Operating Conditions
    Wang B.
    Xie S.
    Qi Y.
    Li Q.
    Jiang C.
    Dong L.
    Tiedao Xuebao/Journal of the China Railway Society, 2020, 42 (08): : 37 - 44
12345