Characterization and Evaluation of Joint Properties of FSWed AA6061/SiC/FA Hybrid AMCs Using Different Tool Pin Profiles

被引：8

作者：

Sachinkumar ^{[1
,3
]}

Narendranath, S. ^{[1
]}

Chakradhar, D. ^{[2
]}

机构：

[1] Natl Inst Technol Karnataka, Dept Mech Engn, Surathkal, Karnataka, India

[2] Indian Inst Technol Palakkad, Dept Mech Engn, Palakkad, Kerala, India

[3] REVA Univ, Sch Mech Engn, Bengaluru, Karnataka, India

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2020年 / 73卷 / 09期

关键词：

Characterization; Friction stir welding; Composites; Tool pin profile; Microstructure; Microhardness; STIR PROCESSING ZONE; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; WELDING SPEED; FRICTION; MICROSTRUCTURE; STRENGTH; PARAMETERS; ALLOY;

D O I：

10.1007/s12666-020-02035-2

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This work reports the characterization of AA6061/SiC/FA hybrid composites joined using friction stir welding (FSW). FSW was conducted by employing various tool pin profiles such as straight cylindrical (SC), tapered conical, straight square (SS) and cylindrical threaded. Microstructure and mechanical characteristics of joints were investigated using these tool pin profiles. Microstructure study of the weld joints was carried out through scanning electron microscopy and electron backscattered diffraction (EBSD) analysis. The results show equiaxed distribution of grains in the nugget zone. EBSD analysis indicates that the average grain size reduces to 3 mu m after FSW with the presence of high-angle grain boundaries. Higher joint efficiency (85%) is obtained for joints obtained using SS tool pin compared to their counterparts, and SC tool yields minimum joint efficiency (77%). Overall 8% enhancement of the joint efficiency is achieved using SS tool pin profile.

引用

页码：2269 / 2279

页数：11

共 34 条

[1] Evaluation of microstructure and mechanical properties in friction stir welded A356+15%SiCp cast composite [J].

Amirizad, A ;

Kokabi, AH ;

Gharacheh, MA ;

Sarrafi, R ;

Amirkhiz, BS ;

Azizieh, M .

MATERIALS LETTERS, 2006, 60 (04) :565-568

[2] Design of the friction stir welding tool using the continuum based FEM model [J].

Buffa, G ;

Hua, J ;

Shivpuri, R ;

Fratini, L .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 419 (1-2) :381-388

[3] Forging of the AA2618/20 vol.% Al2O3p composite: Effects on microstructure and tensile properties [J].

Ceschini, L. ;

Minak, G. ;

Morri, A. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (11-12) :1783-1789

[4]

Chaubey A, 2016, TECHNOLOGY, V37, P1

[5] Friction stir welding characteristics of different heat-treated-state 2219 aluminum alloy plates [J].

Chen, YC ;

Liu, HJ ;

Feng, JC .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 420 (1-2) :21-25

[6] Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy [J].

Elangovan, K. ;

Balasubramanian, V. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 200 (1-3) :163-175

[7] Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloy [J].

Elangovan, K. ;

Balasubramanian, V. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 459 (1-2) :7-18

[8] Effect of microstructural evolution on mechanical properties of friction stir welded AA2009/SiCp composite [J].

Feng, A. H. ;

Xiao, B. L. ;

Ma, Z. Y. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (09) :2141-2148

[9] On lap shear strength of friction stir spot welded AA6061 alloy [J].

Garg, Ashu ;

Bhattacharya, Anirban .

JOURNAL OF MANUFACTURING PROCESSES, 2017, 26 :203-215

[10] Prediction of tensile strength of friction stir welded aluminium matrix TiCp particulate reinforced composite [J].

Gopalakrishnan, S. ;

Murugan, N. .

MATERIALS & DESIGN, 2011, 32 (01) :462-467

← 1 2 3 4 →