Numerical and simplified analytical methods for analysis of the residual strength of ship double bottom

This paper presents a numerical simulation and simplified methods for estimating the residual strength of a damaged double bottom. A typical double-bottom structure from a shuttle tanker was modelled. The structure was idealised to a small degree. Imperfections were introduced to the whole structure according to design rules. The most severe situation of the fully loaded condition was investigated. Hull girder bending was considered. Damage was caused by a variety of indenters that were specially designed to obtain a desired damage profile. A total of 16 numerical-calculation cases were investigated using the explicit commercial code LS-DYNA 971. A simplified method was derived. This method includes elastic plus rigid-plastic analyses of a 3-span, single-stiffener model. Unlike Smith's method, the present approach takes damaged stiffened panels into account in the residual strength assessment. The elastic and rigid-plastic analyses were combined to provide the load-end shortening curve for the damaged stiffeners. A simplified damage mechanism for the tripping of stiffeners is presented, as is a 3-span single stiffener model with proper boundary conditions. Both the analytical and single stiffener models were used to estimate the residual strength of a damaged double bottom. Both methods were validated with a non-linear, finite-element analysis (NLFEA) simulation carried out using LS-DYNA 971. (C) 2012 Elsevier Ltd. All rights reserved.