Effect introduced high density of precipitates on the microstructural evolutions during multi-direction forging of Al-Zn-Mg-Cu alloy

被引：16
作者：
Zhao, Jiuhui [1 ]
Deng, Yunlai [1 ,2 ,3 ]
Tang, Jianguo [1 ,2 ]
Zhang, Jin [1 ]
机构：
[1] Cent South Univ, Light Alloy Res Inst, Changsha, Peoples R China
[2] Cent South Univ, Sch Mat Sci & Engn, Changsha, Peoples R China
[3] Cent South Univ, State Key Lab High Performance & Complex Mfg, Changsha, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2020年 / 798卷
关键词：
Multi-directional forging; Al-Zn-Mg-Cu alloys; Recrystallization mechanism; Grain refinement; SEVERE PLASTIC-DEFORMATION; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; GRAIN-REFINEMENT; TEMPERATURE; STRAIN; 7475-AL-ALLOY; BEHAVIOR; ECAP; SC;
D O I：
10.1016/j.msea.2020.139927
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Large number density of coarse precipitates were introduced into the Al-Zn-Mg-Cu alloy by interrupted aging and then over-aging at 300 degrees C. Both the overaged and homogenized samples were isothermal MDFed at 5 x 10(-3) s(-1) with temperatures ranging from 300 degrees C to 450 degrees C to investigate the effect of high number density of precipitates on the microstructural evolutions. The results showed that the precipitates decreased gradually during MDF of overaged samples at 300 degrees C and 350 degrees C while they were almost dissolved at 400 degrees C and 450 degrees C. And as the result of that the precipitates could pin dislocations during deformation, and much greater grain refinement was achieved during MDF of overaged samples at 300 degrees C and 350 degrees C.
引用
收藏
页数：10
相关论文
共 50 条
  • [31] Effect of quenching rate on strengthening behavior of an Al-Zn-Mg-Cu alloy during natural ageing
    Liu, Shengdan
    Zhang, Menghan
    Li, Qun
    Zhu, Qianqian
    Song, Hui
    Wu, Xiaodong
    Cao, Lingfei
    Couper, Malcolm J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 793 (793):
  • [32] Quantitative study of precipitates in an Al-Zn-Mg-Cu alloy aged with various typical tempers
    Liu, Dongmei
    Xiong, Baiqing
    Bian, Fenggang
    Li, Zhihui
    Li, Xiwu
    Zhang, Yongan
    Wang, Feng
    Liu, Hongwei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 588 : 1 - 6
  • [33] Dynamic interplay between dislocations and precipitates in creep aging of an Al-Zn-Mg-Cu alloy
    Li, Heng
    Bian, Tian-Jun
    Lei, Chao
    Zheng, Gao-Wei
    Wang, Yu-Fei
    ADVANCES IN MANUFACTURING, 2019, 7 (01) : 15 - 29
  • [34] Effects of pre-treatments on aging precipitates and corrosion resistance of a creep-aged Al-Zn-Mg-Cu alloy
    Lin, Y. C.
    Zhang, Jin-Long
    Liu, Guan
    Liang, Ying-Jie
    MATERIALS & DESIGN, 2015, 83 : 866 - 875
  • [35] Distributions of grains and precipitates in gradient lamellae Al-Zn-Mg-Cu alloy by ultrasonic surface rolling processing
    Zheng, G. Y.
    Luo, X.
    Huang, B.
    Li, P. T.
    Yang, Y. Q.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 825
  • [36] Characterisation of high pressure torsion processed 7150 Al-Zn-Mg-Cu alloy
    Ghosh, K. S.
    Gao, N.
    Starink, M. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 552 : 164 - 171
  • [37] Evidence for two-stage hardening in an Al-Zn-Mg-Cu alloy processed by high-pressure torsion
    dos Santos, Igor C.
    Mazzer, Eric M.
    Figueiredo, Roberto B.
    Langdon, Terence G.
    Pereira, Pedro Henrique R.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 941
  • [38] Effect of cooling aging on microstructure and mechanical properties of an Al-Zn-Mg-Cu alloy
    Liu, Yan
    Jiang, Daming
    Li, Bingqing
    Yang, Wenshu
    Hu, Jie
    MATERIALS & DESIGN, 2014, 57 : 79 - 86
  • [39] Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling
    Fu, Yanjun
    Li, Xiwu
    Wen, Kai
    Huang, Shuhui
    Dong, Yang
    Rao, Mao
    Yang, Fubo
    Wang, Yugang
    Xiong, Baiqing
    Li, Zhihui
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2019, 29 (02) : 217 - 223
  • [40] Microstructure Evolution of a High Zinc Containing Al-Zn-Mg-Cu Alloy during Homogenization
    Wen Kai
    Xiong Baiqing
    Zhang Yongan
    Wang Guojun
    Li Xiwu
    Li Zhihui
    Huang Shuhui
    Liu Hongwei
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (04) : 928 - 934
12345