Mechanical Properties of Pure Titanium Processed by Cryogenic Rolling and Annealing

被引：3

作者：

Zhang, Zheng ^{[1
]}

Pan, Hongjiang ^{[1
]}

Meng, Lifang ^{[1
]}

Zhang, Jinxu ^{[1
]}

Yang, Xu ^{[1
]}

Gao, Hongliang ^{[1
]}

Gong, Yulan ^{[1
]}

Shu, Baipo ^{[1
]}

Zhu, Xinkun ^{[1
]}

机构：

[1] Kunming Univ Sci & Technol, Fac Mat Sci & Engn, Kunming, Yunnan, Peoples R China

来源：

MATERIALS TRANSACTIONS | 2019年 / 60卷 / 04期

基金：

中国国家自然科学基金;

关键词：

mechanical properties; cryogenic rolling; annealing; microstructure; bimodal distribution; GRAIN-REFINEMENT; PLASTIC-DEFORMATION; STRENGTH; DUCTILITY; ALUMINUM; MICROSTRUCTURE; METALS; COPPER; SIZE; ECAP;

D O I：

10.2320/matertrans.M2018312

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In order to improve the mechanical properties of pure titanium, a series of pure titanium was processed by cryogenic rolling (CR) and annealing. The annealing was carried out in the temperature range of 420 degrees C to 530 degrees C, and the annealing time was 5 min to 15 min, respectively. It showed that CR at the liquid nitrogen temperature could significantly enhance the strength, but the ductility simultaneously decreased. Subsequent annealing could recover some of the ductility while the strength lowered. Compared with other samples, the sample annealed at 450 degrees C for 10 min had the best combination of strength and ductility because of the bimodal distribution of grain sizes.

引用

页码：513 / 518

页数：6

共 39 条

[1] High strength and utilizable ductility of bulk ultrafine-grained Cu-Al alloys [J].

An, X. H. ;

Han, W. Z. ;

Huang, C. X. ;

Zhang, P. ;

Yang, G. ;

Wu, S. D. ;

Zhang, Z. F. .

APPLIED PHYSICS LETTERS, 2008, 92 (20)

[2] DEFORMATION OF PLASTICALLY NON-HOMOGENEOUS MATERIALS [J].

ASHBY, MF .

PHILOSOPHICAL MAGAZINE, 1970, 21 (170) :399-&

[3] Thermal stability of nanocrystallized surface produced by surface mechanical attrition treatment in aluminum alloys [J].

Chang, H. -W. ;

Kelly, P. M. ;

Shi, Y. -N. ;

Zhang, M. -X. .

SURFACE & COATINGS TECHNOLOGY, 2012, 206 (19-20) :3970-3980

[4] Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium [J].

Chun, YB ;

Yu, SH ;

Semiatin, SL ;

Hwang, SK .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 398 (1-2) :209-219

[5] Deformation behaviour and microstructure of nanocrystalline electrodeposited and high pressure torsioned nickel [J].

Dalla Torre, F ;

Spätig, P ;

Schäublin, R ;

Victoria, M .

ACTA MATERIALIA, 2005, 53 (08) :2337-2349

[6]

Dowling N.E., 2006, MECH BEHAV MAT

[7] Extreme grain refinement by severe plastic deformation: A wealth of challenging science [J].

Estrin, Y. ;

Vinogradov, A. .

ACTA MATERIALIA, 2013, 61 (03) :782-817

[8] Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper [J].

Fang, T. H. ;

Li, W. L. ;

Tao, N. R. ;

Lu, K. .

SCIENCE, 2011, 331 (6024) :1587-1590

[9] Hardening by annealing and softening by deformation in nanostructured metals [J].

Huang, XX ;

Hansen, N ;

Tsuji, N .

SCIENCE, 2006, 312 (5771) :249-251

[10] Multiscale architectured materials with composition and grain size gradients manufactured using high-pressure torsion [J].

Kang, JiYun ;

Kim, Jung Gi ;

Park, Hyo Wook ;

Kim, Hyoung Seop .

SCIENTIFIC REPORTS, 2016, 6

← 1 2 3 4 →