Real solutions of the direct geometrico-static problem of under-constrained cable-driven parallel robots with 3 cables: a numerical investigation

被引:26
作者
Abbasnejad, Ghasem [1 ]
Carricato, Marco [1 ]
机构
[1] Univ Bologna, DIEM Dept Mech Engn, Bologna, Italy
关键词
Cable-driven parallel robots; Under-constrained robots; Kinematics; Statics; DESIGN; MANIPULATORS; WORKSPACE; OPTIMIZATION; JOINTS;
D O I
10.1007/s11012-012-9552-3
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
This paper addresses the direct geometrico-static problem of under-constrained cable-driven parallel robots with 3 cables. The task at hand consists in finding all equilibrium configurations of the end-effector when the cable lengths are assigned. This problem is known to admit 156 solutions in the complex field, but the upper bound on the number of real solutions is as yet an open issue. Finding this bound is the objective of the paper. For this purpose, three numerical approaches are developed, namely a continuation procedure adapted from an algorithm originally proposed by Dietmaier and two evolutionary techniques based on a genetic algorithm and particle swarm optimization. In all cases, a number of sets of robot parameters for which the direct geometrico-static problem provides at the most 54 real configurations is found. The coherence of the obtained results leads to conjecture that the achieved bound is tight. However, formal proof is yet to be discovered.
引用
收藏
页码:1761 / 1773
页数:13
相关论文
共 50 条
[1]   Architecture optimization of 4PUS+1PS parallel manipulator [J].
Abbasnejad, G. ;
Daniali, H. M. ;
Fathi, A. .
ROBOTICA, 2011, 29 :683-690
[2]   Prediction of geometric errors of robot manipulators with Particle Swarm Optimisation method [J].
Alici, Guersel ;
Jagielski, Romuald ;
Sekercioglu, Y. Ahmet ;
Shirinzadeh, Bijan .
ROBOTICS AND AUTONOMOUS SYSTEMS, 2006, 54 (12) :956-966
[3]   Workspace Analysis of a Three DOF Cable-Driven Mechanism [J].
Alikhani, Alireza ;
Behzadipour, Saeed ;
Vanini, S. Ali Sadough ;
Alasty, Aria .
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2009, 1 (04) :1-7
[4]  
[Anonymous], 2011, P 13 WORLD C MECH SC
[5]  
Arai T., 1992, IND ROBOT, V19, P17
[6]   The synthesis of three-degree-of-freedom planar parallel mechanisms with revolute joints (3-(R)under-barRR) for an optimal singularity-free workspace [J].
Arsenault, M ;
Boudreau, R .
JOURNAL OF ROBOTIC SYSTEMS, 2004, 21 (05) :259-274
[7]  
Bates D.J., Bertini: Software for Numerical Algebraic Geometry
[8]   Design of reduced DOF parallel cable-based robots [J].
Behzadipour, S ;
Khajepour, A .
MECHANISM AND MACHINE THEORY, 2004, 39 (10) :1051-1065
[9]   Wrench-feasible workspace generation for cable-driven robots [J].
Bosscher, Paul ;
Riechel, Andrew T. ;
Ebert-Uphoff, Imme .
IEEE TRANSACTIONS ON ROBOTICS, 2006, 22 (05) :890-902
[10]   On the Ability of a Cable-Driven Robot to Generate a Prescribed Set of Wrenches [J].
Bouchard, Samuel ;
Gosselin, Clement ;
Moore, Brian .
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2010, 2 (01) :1-10