Experimental investigation on friction under metal cutting conditions

被引：94

作者：

Puls, H. ^{[1
]}

Klocke, F. ^{[1
]}

Lung, D. ^{[1
]}

机构：

[1] Rhein Westfal TH Aachen, Lab Machine Tools & Prod Engn WZL, D-52074 Aachen, Germany

来源：

WEAR | 2014年 / 310卷 / 1-2期

关键词：

Friction; Metal cutting; Tool-chip interface; IDENTIFICATION; MODEL; WEAR; SIMULATION; INTERFACE;

D O I：

10.1016/j.wear.2013.12.020

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper presents an experimental test to analyze friction phenomena within the tool-chip interface in metal cutting. Therefore, it is designed to obtain experimental data under conditions that are characterized by high contact temperatures, pressures and sliding velocities. The experimental approach is derived from an orthogonal cutting process, modified to a high speed forming and friction process by using an extremely negative rake angle. Such an angle suppresses the formation of chips and results in a smooth plastic flow of metal over the tool surface which generates very high contact temperatures and therefore approaches the conditions of metal cutting. Investigations were conducted for three workpiece materials AISI 1045, AISI 4140 and Inconel 718 in combination with uncoated WC-6Co cemented carbide tools. For these materials, the experimental analysis shows significant thermal softening within the contact interface caused by frictional heat generation and plastic deformation. To account for the observed phenomena, a temperature dependent friction model is proposed and evaluated by a finite element model. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：63 / 71

页数：9

共 27 条

[21] Characterisation of friction and heat partition coefficients at the tool-work material interface in cutting
Rech, J.
Arrazola, P. J.
Claudin, C.
Courbon, C.
Pusavec, F.
Kopac, J.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2013, 62 (01) : 79 - 82
[22] CURRENT STATUS AND FUTURE DIRECTION IN THE NUMERICAL MODELING AND SIMULATION OF MACHINING PROCESSES: A CRITICAL LITERATURE REVIEW
Shi, Bin
Attia, Helmi
[J]. MACHINING SCIENCE AND TECHNOLOGY, 2010, 14 (02) : 149 - 188
[23] Spittel M., 2009, SPRINGERMATERIALS LA
[24] Spriggs G.E., 2002, SpringerMaterials - The Landolt-Bornstein Database
[25] TREPPMANN C, 2001, THESIS RWTH AACHEN
[26] Usui E, 1960, T ASME J ENG IND, V80, P303
[27] Identification of a friction model at tool/chip/workpiece interfaces in dry machining of AISI4142 treated steels
Zemzemi, F.
Rech, J.
Ben Salem, W.
Dogui, A.
Kapsa, P.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) : 3978 - 3990

← 1 2 3 →