Oil palm lignin under subcritical phenol conditions as precursor for carbon fibre production

被引:2
作者
Khalid, Khalidatul Athirah [1 ]
Karunakaran, Vijayaletchumy [1 ]
Abd-Talib, Norfahana [1 ]
Pa'ee, Khairul Faizal [1 ]
Tong, Woei Yenn [1 ]
Anuar, Mohd Razealy [1 ]
Yong, Tau-Len Kelly [1 ]
机构
[1] Univ Kuala Lumpur, Malaysian Inst Chem & Bioengn Technol UniKL MICET, Alor Gajah 78000, Melaka, Malaysia
关键词
Lignin; Carbon fibre; Oil palm; Subcritical phenol; Precursor; EMPTY FRUIT BUNCHES; MOLECULAR-WEIGHT; ENZYMATIC-HYDROLYSIS; TEMPERATURE; DEPOLYMERIZATION; CONVERSION; BIOMASS; LIGNOPHENOL; POLYMER; HEMICELLULOSE;
D O I
10.1007/s13399-020-01051-y
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Carbon fibre is as thin as a strand of human hair but is five times stronger than, twice stiffer and lighter than steel; thus, an ideal advanced material in aerospace and automotive industries. However, carbon fibre is 20 times more expensive than steel because of expensive precursors, polyacrylonitrile and pitch, that account for 51% of the total manufacturing cost. Therefore, an alternative precursor, with superior properties, is required. Although successful studies for lignin extraction in subcritical phenol have been reported, there are no studies on evaluation of the lignin fundamental properties related to its suitability as a precursor for carbon fibre. In this study, the extraction of lignin from biomass was conducted in a batch system under subcritical phenol conditions by focusing on its fundamental properties (average molecular weight and glass transition temperature). The effect of temperatures (260-300 degrees C), reaction times (1-30 min) and solids loading (6 and 10 g) on these properties was determined. The results indicated that lignin from biomass under subcritical phenol conditions fulfilled the requirement as a precursor for carbon fibre. The average molecular weight and glass transition temperature was in the range of 145.5-269.6 g/mol and 40.5-89.3 degrees C for lignin from empty fruit bunch. On the other hand, the average molecular weight and glass transition temperature of lignin from oil palm frond was 263.8-435.4 g/mol and 71.2-96.3 degrees C. The increase in temperature reduced the dielectric constant of the subcritical phenol and facilitated lignin depolymerisation. The reactive fragments and the active sites were capped by phenol to suppress the cross-linking reactions and hence the formation of heavier fragments. The minimal decrease in average molecular weight and glass transition temperature of lignin with solids loading supported the conclusion that repolymerisation of lignin likely did not occur under subcritical phenol conditions.
引用
收藏
页码:5505 / 5513
页数:9
相关论文
共 61 条
  • [1] Abdullah SSS, 2009, J OIL PALM RES, V21, P700
  • [2] [Anonymous], 2002, T212OM02 TAPPI
  • [3] [Anonymous], 2007, T264CM97 TAPPI
  • [4] [Anonymous], 2002, T211OM02 TAPPI
  • [5] [Anonymous], 1999, T203OM93 TAPPI
  • [6] Aoyagi M, 2010, T MAT RES SOC JPN, V35, P967, DOI DOI 10.14723/tmrsj.35.967
  • [7] An overview of the oil palm industry in Malaysia and its waste utilization through thermochemical conversion, specifically via liquefaction
    Awalludin, Mohd Fahmi
    Sulaiman, Othman
    Hashim, Rokiah
    Nadhari, Wan Noor Aidawati Wan
    [J]. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2015, 50 : 1469 - 1484
  • [8] Recent advances in low-cost carbon fiber manufacture from lignin
    Baker, Darren A.
    Rials, Timothy G.
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 130 (02) : 713 - 728
  • [9] Baker FS, 2005, LOW COST CARBON FIBE
  • [10] Effect of pH on Kraft Lignin Depolymerisation in Subcritical Water
    Belkheiri, Tallal
    Mattsson, Cecilia
    Andersson, Sven-Ingvar
    Olausson, Lars
    Amand, Lars-Erik
    Theliander, Hans
    Vamling, Lennart
    [J]. ENERGY & FUELS, 2016, 30 (06) : 4916 - 4924