Simulation and Modeling Method for Micro Turn-milling Cutting Process

被引：0
|
作者：
Zhao, Zengwu [1 ]
Jin, Xin [1 ]
Zhang, Zhijing [1 ]
Sun, Xuyao [1 ]
Deng, Yongjun [1 ]
机构：
[1] Beijing Inst Technol, Sch Mech Engn, Beijing 100081, Peoples R China
来源：
DIGITAL MANUFACTURING & AUTOMATION III, PTS 1 AND 2 | 2012年 / 190-191卷
关键词：
Micro turn-milling; Cutting force; Finite element simulation; Experimental verification;
D O I：
10.4028/www.scientific.net/AMM.190-191.182
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
A simulation and modeling method for micro turn-milling cutting process was investigated to predict the impacts of cutting speed and cutting depth on cutting force. Based on material Johnson-Cook constitutive model and chip separation criteria, the finite element model was established in ABAQUS simulation application, then the model analysis and experiment verification was conducted. The results indicate that the simulation model can predict the value and regularity of cutting force, which can provide guidance on process optimization and machining accuracy control.
引用
收藏
页码：182 / 186
页数：5
相关论文
共 50 条
  • [31] Performance evaluation method for cutting fluids using cutting force in micro-feed end milling
    Kitamura, Tomohiko
    Tanaka, Ryutaro
    Yamane, Yasuo
    Sekiya, Katsuhiko
    Yamada, Keiji
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2020, 62 : 232 - 243
  • [32] Simulation and Experiment of Cutting Force in Ultrasonic Torsional Vibration Assisted Micro-milling
    Hu Haijun
    Sun Yazhou
    Lu Zesheng
    5TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: DESIGN, MANUFACTURING, AND TESTING OF MICRO- AND NANO-OPTICAL DEVICES AND SYSTEMS, 2010, 7657
  • [33] Modeling the Influence of Tool Deflection on Cutting Force and Surface Generation in Micro-Milling
    Huo, Dehong
    Chen, Wanqun
    Teng, Xiangyu
    Lin, Chao
    Yang, Kai
    MICROMACHINES, 2017, 8 (06):
  • [34] Modeling of cutting force, tool deflection, and surface error in micro-milling operation
    Moges, Tesfaye M.
    Desai, K. A.
    Rao, P. V. M.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 98 (9-12) : 2865 - 2881
  • [35] Cutting force model considering tool edge geometry for micro end milling process
    Kang, Ik Soo
    Kim, Jeong Suk
    Seo, Yong Wie
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2008, 22 (02) : 293 - 299
  • [36] Cutting force model considering tool edge geometry for micro end milling process
    Ik Soo Kang
    Jeong Suk Kim
    Yong Wie Seo
    Journal of Mechanical Science and Technology, 2008, 22 : 293 - 299
  • [37] Modeling Dynamic Stability and Cutting Forces in Micro Milling of Ti6Al4V Using Intermittent Oblique Cutting Finite Element Method Simulation-Based Force Coefficients
    Sahoo, Priyabrata
    Patra, Karali
    Singh, Vishnu K.
    Mittal, Rinku K.
    Singh, Ramesh K.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2020, 142 (09):
  • [38] Modeling of cutting force, tool deflection, and surface error in micro-milling operation
    Tesfaye M. Moges
    K. A. Desai
    P. V. M. Rao
    The International Journal of Advanced Manufacturing Technology, 2018, 98 : 2865 - 2881
  • [39] Cutting Forces Simulation for End Milling
    Petrakov, Y., V
    Ohrimenko, O. A.
    Sikailom, M.
    Myhovych, A., V
    JOURNAL OF ENGINEERING SCIENCES-UKRAINE, 2023, 10 (02): : A27 - A33
  • [40] Cutting Force Analysis in Micro Milling of Steel
    Wu, Bing
    Li, Huaizhong
    ADVANCED TECHNOLOGIES IN MANUFACTURING, ENGINEERING AND MATERIALS, PTS 1-3, 2013, 774-776 : 1017 - 1020
12345