Electrical Conduction and Dielectric Breakdown Characteristics of Alkyl Ester Dielectric Fluids obtained from Palm Kernel Oil

Naturally occurring palm kernel oil (PKO) and its ester derivatives are being considered as sustainable alternatives to synthetic oils for use as dielectric fluids. This paper reports on their dielectric properties, which have been studied and compared to BS148 mineral oil. The low frequency complex dielectric response of the PKO and its derivatives are related to ionic conduction and electrode polarization phenomena. The purified PKO has an electrical conductivity of 3.04 x 10(-12) S.m(-1) at 30 degrees C; this is 10 times lower than crude PKO but about 10 times greater than the BS148 oil. The bulk conductivity is thermally activated, activation energy = 0.47 eV, and influenced by viscosity. The ester derivatives have a higher conductivity than the PKO, which is related to ionic impurities introduced during processing. The breakdown field was measured in a bespoke cell enabling smaller volumes of oil (15 ml) than that used in ASTM D1816. The characteristic ac breakdown strength of purified PKO and is alkyl esters were found to be in the range, 41 to 43 kV/mm, which is significantly higher than the mineral oil (27 kV/mm). The results support the proposition that a dielectric fluid derived from palm kernel oil, once re-purified, may be a suitable replacement for mineral oil based fluids in HV electrical equipment.