Identification of roughness parameter when turning process with helical cutting edge for machining of automotive transmission parts

被引：1
|
作者：
Martikan, Pavol [1 ]
Holubjak, Jozef [1 ]
Czanova, Tatiana [1 ]
Pustay, Jozef [1 ]
Joch, Richard [1 ]
机构：
[1] Univ Zilina, Dept Machining & Mfg Technol, Fac Mech Engn, Univ 1, Zilina 01026, Slovakia
来源：
13TH INTERNATIONAL SCIENTIFIC CONFERENCE ON SUSTAINABLE, MODERN AND SAFE TRANSPORT (TRANSCOM 2019) | 2019年 / 40卷
关键词：
hard turning; helical cutting edge; theoretical roughness; DISINTEGRATION; WEAR;
D O I：
10.1016/j.trpro.2019.07.053
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This article describes process of identifying of the value of roughness parameters from basic kinematic and geometric characteristics of turning process with tool with helical cutting edge. The final mathematical formula is deduced from graphic sketch of turning process and consequently identified using all the known geometric and kinematic parameters. This formula can be used to theoretic evaluation of geometric and cutting parameters influence on the quality of machined surface determined by roughness characteristic of theoretic parameters. (C) 2019 The Authors. Published by Elsevier B.V.
引用
收藏
页码：362 / 366
页数：5
相关论文
共 6 条
  • [1] Machining of bone: Analysis of cutting force and surface roughness by turning process
    Noordin, M. Y.
    Jiawkok, N.
    Ndaruhadi, P. Y. M. W.
    Kurniawan, D.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2015, 229 (11) : 761 - 768
  • [2] Influence Of Machining Parameter On Cutting Force And Surface Roughness While Turning Alloy Steel
    Chandra, Poorna
    Rao, C. R. Prakash
    Kiran, R.
    Kumar, V. Ravi
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) : 11794 - 11801
  • [3] Reinforcement Learning-Based Cutting Parameter Dynamic Decision Method Considering Tool Wear for a Turning Machining Process
    Zhao, Xikun
    Li, Congbo
    Tang, Ying
    Li, Xinyu
    Chen, Xingzheng
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2024, 11 (04) : 1053 - 1070
  • [4] Analysis of surface roughness in turning process using rotating tool with chip breaker for specific shapes of automotive transmission shafts
    Joch, Richard
    Pilc, Jozef
    Danis, Igor
    Drbul, Mario
    Krajcoviech, Stanislav
    13TH INTERNATIONAL SCIENTIFIC CONFERENCE ON SUSTAINABLE, MODERN AND SAFE TRANSPORT (TRANSCOM 2019), 2019, 40 : 295 - 301
  • [5] Constant surface roughness over tool-lifetime due to online process monitoring and cutting parameter adaption in turning of gear steel
    Uhlmann E.
    Holznagel T.
    Berardi P.
    International Journal of Sustainable Manufacturing, 2020, 4 (2-4) : 251 - 265
  • [6] Modelling, prediction and analysis of surface roughness in turning process with carbide tool when cutting steel C38 using artificial neural network
    Boukezzi F.
    Noureddine R.
    Benamar A.
    Noureddine F.
    Boukezzi, Farid (f_boukezzi@yahoo.com), 1600, Inderscience Enterprises Ltd., 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (26): : 567 - 583
1