Evaluation of Dissimilar Welds of 5083-H12 and 6061-T6 Produced by Friction Stir Welding

被引：24

作者：

Ghaffarpour, Morteza ^{[1
]}

Kolahgar, Sina ^{[2
]}

Dariani, Bijan Mollaei ^{[1
]}

Dehghani, Kamran ^{[3
]}

机构：

[1] Amirkabir Univ Technol, Dept Mech Engn, Tehran, Iran

[2] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran, Iran

[3] Amirkabir Univ Technol, Dept Mat Sci & Engn, Tehran, Iran

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2013年 / 44A卷 / 08期

关键词：

MECHANICAL-PROPERTIES; FORMABILITY; SHEETS; PARAMETERS; BEHAVIOR; ALLOYS;

D O I：

10.1007/s11661-013-1739-2

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the present study, the dissimilar aluminum alloys of 5083-H12 and 6061-T6 were joined by friction stir welding (FSW). Then, the design of experiments (DOE), the Box-Benken method, and the response surface methodology (RSM) were used to optimize the effective parameters of the FSW process. The optimized parameters that led to the maximum tensile strength in dissimilar friction stir welded sheets were determined. The predicted results were then compared with those measured experimentally. The results show that there is good agreement between the predicted and measured amounts. By applying the limit dome height (LDH) test, the formability of friction stir welded sheets was studied. During the LDH test, the minimum formability occurred in the heat-affected zone (HAZ) of the 6061-T6 side. The results of microhardness and tensile tests confirm the results of the LDH tests.

引用

页码：3697 / 3707

页数：11

共 20 条

[1] ON THE EXPERIMENTAL ATTAINMENT OF OPTIMUM CONDITIONS [J].

BOX, GEP ;

WILSON, KB .

JOURNAL OF THE ROYAL STATISTICAL SOCIETY SERIES B-STATISTICAL METHODOLOGY, 1951, 13 (01) :1-45

[2] Friction stir welding of dissimilar alloys - a perspective [J].

DebRoy, T. ;

Bhadeshia, H. K. D. H. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2010, 15 (04) :266-270

[3] Optimization of friction stir welding parameters for dissimilar aluminum alloys [J].

Ghosh, M. ;

Kumar, K. ;

Kailas, S. V. ;

Ray, A. K. .

MATERIALS & DESIGN, 2010, 31 (06) :3033-3037

[4]

Indira Rani M., 2011, J ENG APPL SCI, V6, P871

[5]

Janaki Ramulu P., 2012, ADV MAT RES, V410, P287

[6] Formability evaluation of friction stir welded 6111-T4 sheet with respect to joining material direction [J].

Kim, Daeyong ;

Lee, Wonoh ;

Kim, Junehyung ;

Kim, Chongmin ;

Chung, Kwansoo .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2010, 52 (04) :612-625

[7] Experimental and numerical study on formability of friction stir welded TWB sheets based on hemispherical dome stretch tests [J].

Lee, Wonoh ;

Chung, Kyung-Hwan ;

Kim, Daeyong ;

Kim, Junehyung ;

Kim, Chongmin ;

Okamoto, Kazutaka ;

Wagoner, R. H. ;

Chung, Kwansoo .

INTERNATIONAL JOURNAL OF PLASTICITY, 2009, 25 (09) :1626-1654

[8] Mechanical behaviour of similar and dissimilar AA5182-H111 and AA6016-T4 thin friction stir welds [J].

Leitao, C. ;

Leal, R. M. ;

Rodrigues, D. M. ;

Loureiro, A. ;

Vilaca, P. .

MATERIALS & DESIGN, 2009, 30 (01) :101-108

[9] Tensile behavior of friction-stir-welded A356-T6/Al 6061 T651 Bi-alloy plate [J].

Lim, S ;

Kim, S ;

Lee, CG ;

Kim, S .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (09) :2837-2843

[10] Formability of friction-stir-welded dissimilar-aluminum-alloy sheets [J].

Miles, MP ;

Melton, DW ;

Nelson, TW .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (12) :3335-3342

← 1 2 →