Strength analysis of a large centrifugal dredge pump case

被引：9
|
作者：
Peng Guangjie [1 ]
Wang Zhengwei [1 ]
Yan Zongguo [1 ]
Liu Ruixiang [2 ]
机构：
[1] Tsinghua Univ, Dept Thermal Engn, Beijing 100084, Peoples R China
[2] Tianjin Dredging Co, Tianjin 300042, Peoples R China
来源：
ENGINEERING FAILURE ANALYSIS | 2009年 / 16卷 / 01期
关键词：
Dredge pump; Strength analysis; Crack; Finite element analysis;
D O I：
10.1016/j.engfailanal.2008.05.015
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Cracks in the cases of large dredge pumps have limited their performance. This paper describes optimization of the pump case design using a finite element analysis. The stress concentrations usually occur on the ribs or above the ribs. Therefore, the stress characteristics of the pump case were analyzed for several conditions with different thicknesses and placements of the strengthened ribs. The optimized result found by removing or shortening the ribs has a maximum stress in the pump case which is far less than the material is allowable stress. The simulation results were verified in a 2 MPa hydrostatic pressure test in which no crack appeared and predicted the distortion in the axial direction agreed well with the test result. Therefore, this method can be used to improve the designs of large dredge pump cases. (c) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：321 / 328
页数：8
相关论文
共 50 条
  • [1] Added mass moment of inertia of centrifugal dredge pump impellers
    van Wijk, Jort M.
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-MARITIME ENGINEERING, 2014, 167 (03) : 135 - 143
  • [2] Vibration analysis of large centrifugal pump rotors
    Zhao, W. Y.
    Ge, J. G.
    Ma, D.
    Li, C. M.
    Bao, S. B.
    6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013), 2013, 52
  • [3] CFD ANALYSIS AND EXPERIMENTAL COMPARISON OF A LARGE CENTRIFUGAL PUMP
    Rocco, Giuseppe
    Schiavello, Bruno
    Pirola, Davide
    Cicatelli, Giancarlo
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2017, VOL 1A, 2017,
  • [4] Trajectories of coarse granular sediment particles in a simplified centrifugal dredge pump model
    Hong, Guojun
    Zhang, Qingbo
    Yu, Guoliang
    ADVANCES IN MECHANICAL ENGINEERING, 2016, 8 (11): : 1 - 11
  • [5] Thermodynamic analysis of energy dissipation and unsteady flow characteristic in a centrifugal dredge pump under over-load conditions
    Zhao, Xiaoran
    Wang, Zhengwei
    Xiao, Yexiang
    Luo, Yongyao
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2019, 233 (13) : 4742 - 4753
  • [6] Numerical Analysis on the Unsteady Radial Load on the Shaft of a Large-Scale Dredge Pump Unit
    Cao, L.
    Wu, T.
    Guo, T.
    Hu, J.
    Cao, J.
    JOURNAL OF APPLIED FLUID MECHANICS, 2023, 16 (05) : 1005 - 1016
  • [7] Modal analysis of a centrifugal pump
    Nasser, AA
    Nasser, MA
    El-Shirbeeny, EHT
    Abdel-Rahman, SM
    IMAC - PROCEEDINGS OF THE 16TH INTERNATIONAL MODAL ANALYSIS CONFERENCE, VOLS 1 AND 2, 1998, 3243 : 550 - 557
  • [8] Case 17: Wreck of a centrifugal pump
    Sofronas, T
    HYDROCARBON PROCESSING, 2003, 82 (10): : 95 - 95
  • [9] STRENGTH AND VIBRATION OF CENTRIFUGAL PUMP ROTORS WITH PLASTICS IMPELLERS
    VASILEV, VV
    RUSSIAN ENGINEERING JOURNAL, 1974, 54 (07): : 20 - 21
  • [10] Simulations and measurements of dredge pump
    Peng Guangjie
    Wang Zhengwei
    Yang Wen
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 2, 2005, : 43 - 45
12345