共 34 条
Cyclic Hot Corrosion Failure Behaviors of EB-PVD TBC Systems in the Presence of Sulfate and Vanadate Molten Salts
被引:53
作者:
Ozgurluk, Yasin
[1
]
Doleker, Kadir Mert
[1
]
Ozkan, Dervis
[2
]
Ahlatci, Hayrettin
[3
]
Karaoglanli, Abdullah Cahit
[1
]
机构:
[1] Bartin Univ, Fac Engn, Dept Met & Mat Engn, TR-74100 Bartin, Turkey
[2] Bartin Univ, Fac Engn, Dept Mech Engn, TR-74100 Bartin, Turkey
[3] Karabuk Univ, Fac Engn, Dept Met & Mat Engn, TR-78050 Karabuk, Turkey
来源:
关键词:
thermal barrier coatings (TBCs);
electron beam physical vapor deposition (EB-PVD);
cold gas dynamic spray (CGDS);
hot corrosion;
molten salts;
THERMAL-BARRIER COATINGS;
YSZ;
RESISTANCE;
SPRAY;
CGDS;
MICROSTRUCTURE;
OXIDATION;
GD2ZR2O7;
D O I:
10.3390/coatings9030166
中图分类号:
T [工业技术];
学科分类号:
08 ;
摘要:
The cold gas dynamic spray (CGDS) method has been considered a promising technology to produce a metallic bond coat for thermal barrier coating (TBC) systems. In this study, CoNiCrAlY bond coats produced by CGDS method were coated with yttria-stabilized zirconia (YSZ) by electron beam physical vapor deposition (EB-PVD). TBCs were subjected to 50 wt % V2O5 and 50 wt % Na2SO4 molten hot corrosion salt combinations at 1000 degrees C. In the case of YSZ top coat on TBCs, the reaction between Na2SO4, V2O5, and Y2O3 salts generates YVO4 crystals, and these structures cause the transformation of tetragonal ZrO2 to monoclinic ZrO2. This situation occurs under operating conditions that lead to TBC failure. Hot corrosion behavior and the related failure mechanisms of TBC systems were investigated and discussed using scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) analysis, and X-ray diffractometer (XRD).
引用
收藏
页数:11
相关论文