Effect of heat treatment on microstructure and mechanical properties of A390 alloy

被引：10

作者：

Li, B. ^{[1
]}

Zhang, Z. F. ^{[1
]}

Wang, Z. G. ^{[1
]}

Xu, J. ^{[1
]}

Zhu, Q. ^{[1
]}

机构：

[1] Gen Res Inst Nonferrous Met, Nonferrous Met Proc Div, Beijing 100088, Peoples R China

来源：

ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3 | 2013年 / 652-654卷

关键词：

A390; alloy; Heat treatment; Microstructure; Mechanical properties; AL-SI ALLOYS; PARTICLES;

D O I：

10.4028/www.scientific.net/AMR.652-654.1049

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the present work, the effects of heat treatment on microstructure and mechanical properties of A390 alloy were investigated. The results show that the as-cast microstructure of A390 alloy mainly consists of primary silicon, alpha-Al, eutectic silicon and Al2Cu phase. The morphology of primary silicon is irregular polygonal block with sharp edges. Eutectic silicon exhibits a coarse plate-like and acicular morphology and the fishbone like Al2Cu phases are gathered at the grain boundary. During solution treatment, eutectic silicon undergoes fragmentation and spheroidization and T6 heat treatment has a profound effect on the dissolution of Cu and Mg. However, the morphology and size of primary silicon changes little. After the aging process, Al2Cu phases are precipited as lamellar morphology. As a result, the mechanical properties the heat treated A390 alloy increases significantly after T6 treatment.

引用

页码：1049 / 1053

页数：5

共 18 条

[1]

Crepean N., 1995, AFS T, V103, P361

[2] Effect of processing on the microstructural variation and heat-treatment response of a hypereutectic Al-Si alloy [J].

Gupta, M ;

Lavernia, EJ .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 54 (1-4) :261-270

[3] Microstructure and mechanical properties of hypo/hyper-eutectic Al-Si alloys synthesized using a near-net shape forming technique [J].

Gupta, M ;

Ling, S .

JOURNAL OF ALLOYS AND COMPOUNDS, 1999, 287 (1-2) :284-294

[4] Effect of element additions on wear property of eutectic aluminium-silicon alloys [J].

Harun, M ;

Talib, IA ;

Daud, AR .

WEAR, 1996, 194 (1-2) :54-59

[5] The effects of processing parameters on the microstructure and mechanical properties of modified B390 alloy in direct squeeze casting [J].

Maeng, DY ;

Lee, JH ;

Won, CW ;

Cho, SS ;

Chun, BS .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 105 (1-2) :196-203

[6] Precipitation of Si particles in a super-rapidly solidified Al-Si hypereutectic alloy [J].

Matsuura, K ;

Kudoh, M ;

Kinoshita, H ;

Takahashi, H .

MATERIALS CHEMISTRY AND PHYSICS, 2003, 81 (2-3) :393-395

[7] The effect of SiC particles on the size and morphology of eutectic silicon in cast A356/SiCp composites [J].

Nagarajan, S ;

Dutta, B ;

Surappa, MK .

COMPOSITES SCIENCE AND TECHNOLOGY, 1999, 59 (06) :897-902

[8] DISSOLUTION OF IRON INTERMETALLICS IN AL-SI ALLOYS THROUGH NONEQUILIBRIUM HEAT-TREATMENT [J].

NARAYANAN, LA ;

SAMUEL, FH ;

GRUZLESKI, JE .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (08) :2161-2174

[9]

Ogris E., 2002, J. Light. Met., V2, P263, DOI [10.1016/S1471-5317(03)00010-5, DOI 10.1016/S1471-5317(03)00010-5]

[10]

Shivkumar S., 1995, TRANSACTIONS, V103, P721

← 1 2 →