Microstructure and texture evolution of a cold rolled Ni-Cr-W alloy after annealing

被引：1
|
作者：
Wang, W. [1 ]
Drouelle, I. [1 ]
Brisset, F. [1 ]
Mathon, M. H. [2 ]
Auger, T. [3 ]
Baudin, T. [1 ]
机构：
[1] Univ Paris 11, CNRS, ICMMO, UMR 8182, F-91405 Orsay, France
[2] CEA Saclay, CNRS CEA, Leon Brillouin Lab, F-92290 Chatenay Malabry, France
[3] CNRS, UMR 8579, MSSMAT, ECP, F-92290 Chatenay Malabry, France
来源：
TEXTURES OF MATERIALS, PTS 1 AND 2 | 2012年 / 702-703卷
关键词：
Texture; Microstructure; Cold rolling; Annealing; EBSD; Neutron diffraction; Ni-Cr-W alloy; RECRYSTALLIZATION TEXTURES;
D O I：
10.4028/www.scientific.net/MSF.702-703.352
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A Ni-5.7%Cr-25.2%W (wt%) alloy was deformed by cold rolling in different reduction conditions (50%, 70%, and 90%) and then annealed under hydrogen atmosphere. Microstructure and texture evolutions were analyzed using Electron Back Scattered Diffraction (EBSD). Orientation Distribution Functions (ODFs) and stored energy were calculated from neutron diffraction measurements. A strengthening of the a-fiber texture was observed after 90% cold rolling and a homogenous microstructure was obtained after annealing at 900 degrees C.
引用
收藏
页码：352 / +
页数：2
相关论文
共 50 条
  • [41] Microstructure Evolution of Alloy 800H during Cold Rolling and Subsequent Annealing
    Dong, Qingshan
    Wang, Qiang
    Long, Fei
    METALS, 2024, 14 (07)
  • [42] Microstructure and Texture Evolution During Annealing of Caliber Rolled Mg-3Al-1Zn Alloy
    Doiphode, R. L.
    Murty, S. V. S. Narayana
    Prabhu, N.
    Kashyap, B. P.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 : S317 - S321
  • [43] Microstructure, Texture and Mechanical Properties after Cold Working and Annealing in a Biomedical Ti-Nb-Ta Alloy
    Acharya, Srijan
    Gupta, Praveen
    Chatterjee, Kaushik
    Suwas, Satyam
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 2465 - 2470
  • [44] Texture Evolution in a Warm-Rolled Ti-IF Steel During Cold Rolling and Annealing
    Yanhui Guo
    Zhaodong Wang
    Jishan Xu
    Guodong Wang
    Xianghua Liu
    Journal of Materials Engineering and Performance, 2009, 18 : 378 - 384
  • [45] Texture evolution of α- and β-phases in a cold rolled CuZnAl shape memory alloy
    Yuan, WQ
    Park, NJ
    TEXTURE AND ANISOTROPY OF POLYCRYSTALS, 1998, 273-2 : 541 - 546
  • [46] Evaluation of microstructure and texture formation during annealing of cold-rolled FeCrCuMnNi multiphase high-entropy alloy
    Shabani, Ali
    Toroghinejad, Mohammad Reza
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2020, 30 (02) : 449 - 462
  • [47] Microstructure and texture evolution during annealing of Ti-6Al-4V alloy
    Debta, M. K.
    Bishoyi, B. D.
    Sabat, R. K.
    Muhammad, W.
    Sahoo, S. K.
    MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (04) : 417 - 424
  • [48] Evolution of microstructure and texture during annealing in a high-pressure torsion processed Fe-9Cr alloy
    Duan, Jiaqi
    Wen, Haiming
    Zhou, Caizhi
    Islamgaliev, Rinat
    Li, Xianchao
    MATERIALIA, 2019, 6
  • [49] The Effect of Annealing Treatment on the Microstructure and Texture of a Cold-Rolled TiNiFe Shape Memory Alloy Tube
    Wen, Jianxian
    Song, Xiaoyun
    Li, Yanfeng
    Liu, Shuwei
    Yu, Yang
    Ye, Wenjun
    Hui, Songxiao
    CRYSTALS, 2024, 14 (03)
  • [50] MICROSTRUCTURE AND TEXTURE EVOLUTIONS OF AA1050 ALUMINUM ALLOY COLD ROLLED TO HIGH STRAINS
    Yao Zongyong
    Liu Qing
    Godfrey, A.
    Liu Wang
    ACTA METALLURGICA SINICA, 2009, 45 (06) : 647 - 651
12345