Surface Modification of Ti-6Al-4V Alloy with Laser Alloyed TiN/Ti-B Ceramic Reinforced Layers

被引：0

作者：

Tian, Y. ^{[1
]}

Xia, X-Y. ^{[1
]}

Li, J-N. ^{[1
]}

Su, M-L. ^{[1
]}

Sun, X-G. ^{[1
]}

机构：

[1] Shandong Jianzhu Univ, Sch Mat Sci & Engn, Jinan 250101, Shandong, Peoples R China

来源：

LASERS IN ENGINEERING | 2019年 / 43卷 / 4-6期

关键词：

CO2; laser; titanium alloy; Ti-6Al-4V; ceramics; powder; laser alloying; surface modification; microstructure; microhardness; wear resistance; MICROSTRUCTURE; COATINGS; BEHAVIOR;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Laser alloying of Fe/Al/Ni/Cr-NB mixed powders on a Ti-6Al-4V alloy substrate surface formed a hard and wear resistant layer, which was well combined with metallurgy of the substrate. The microstructures of produced laser alloyed layers with the different laser process parameters were observed. It was noted that lots of rod/block-shape precipitates were dispersed uniformly in such laser alloying layers. With the increase of the scanning speed, the fine microstructure was observed; when the scanning speed was too fast, the existence time of laser molten pool became short, leading the amorphous phases to be produced. Compared with the titanium alloy substrate, the enhancements of the microhardness and the wear resistance were obtained for this laser alloying layer.

引用

页码：361 / 367

页数：7

共 17 条

[1]

Amuda MOH, 2017, MATER TODAY-PROC, V4, P763, DOI 10.1016/j.matpr.2017.01.084

[2] The effect of TiC/Al2O3 composite ceramic reinforcement on tribological behavior of laser cladding Ni60 alloys coatings [J].

Cai, Yangchuan ;

Luo, Zhen ;

Feng, Mengnan ;

Liu, Zuming ;

Huang, Zunyue ;

Zeng, Yida .

SURFACE & COATINGS TECHNOLOGY, 2016, 291 :222-229

[3] Microstructure and wear resistance of laser clad TiB-TiC/TiNi-Ti2Ni intermetallic coating on titanium alloy [J].

Feng Shu-rong ;

Tang Hai-bo ;

Zhang Shu-quan ;

Wang Hua-ming .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (07) :1667-1673

[4]

Hayden DC, 2012, ADV MATER PROCESS, V170, P46

[5] Laser in-situ synthesis of TiB2-Al composite coating for improved wear performance [J].

Katakam, Shravana ;

Asiamah, Nana ;

Santhanakrishnan, Soundarapandian ;

Dahotre, Narendra .

SURFACE & COATINGS TECHNOLOGY, 2013, 236 :200-206

[6] Parametric study and characterization of AlN-Ni-Ti6Al4V composite cladding on titanium alloy [J].

Kumar, Shakti ;

Mandal, Amitava ;

Das, Alok K. ;

Dixit, Amit R. .

SURFACE & COATINGS TECHNOLOGY, 2018, 349 :37-49

[7] Laser cladding strategies for producing WC reinforced NiCr coatings inside twin barrels [J].

Leunda, Josu ;

Sanz, Carmen ;

Soriano, Carlos .

SURFACE & COATINGS TECHNOLOGY, 2016, 307 :720-727

[8]

Li JN, 2017, LASER ENG, V36, P215

[9] Microstructure and physical performance of laser-induction nanocrystals modified high-entropy alloy composites on titanium alloy [J].

Li, Jianing ;

Craeghs, Werner ;

Jing, Cainian ;

Gong, Shuili ;

Shan, Feihu .

MATERIALS & DESIGN, 2017, 117 :363-370

[10] Phase constituents and microstructure of laser cladding Al2O3/Ti3Al reinforced ceramic layer on titanium alloy [J].

Li Jianing ;

Chen Chuanzhong ;

Lin Zhaoqing ;

Squartini, Tiziano .

JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (14) :4882-4886

← 1 2 →