Fabrication and characterization of amorphous-nanocrystalline Al80Fe10Ti5M3B2 (M=Cr, Ni and Nb) alloys

被引:0
作者
Ravanbakhsh, A. [1 ]
Tavoosi, M. [2 ]
Karimzadeh, F. [1 ]
机构
[1] Isfahan Univ Technol, Nanotechnol & Adv Mat Inst, Dept Mat Engn, Esfahan 8415683111, Iran
[2] Malek Ashtar Univ Technol, Dept Mat Engn, Shahin Shahr, Isfahan, Iran
关键词
Amorphous-nanocrystalline phase; Al-base alloys; Mechanical alloying; Crystallization kinetic; CRYSTALLIZATION; FE; EVOLUTION; KINETICS; POWDERS; PHASES; GLASS; TI;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, the formation and characterization of amorphous-nanocrystalline phases in Al80Fe10Ti5M3B2 (M=Cr, Ni and Nb) powder mixtures by the means of mechanical alloying (MA) have been investigated. The milled samples are characterized using X-ray diffraction (XRD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). Mechanical alloying of these alloying systems shows that amorphous phase can be formed only in Al80Fe10Ti5Ni3B2 powder mixture and the final products in other systems are combination of amorphous and nanocrystalline phases. The produced amorphous phase in different alloying systems, exhibits one-stage crystallization on on heating (atat temperature up than temperature higher than 800 degrees C) and the crystallization's activation energy is more than 240 +/- 20 kJ/mol. The crystallization products (Al13Fe4) and mechanism (polymorphism) of amorphous phase in these three systems are the same.
引用
收藏
页码:307 / 312
页数:6
相关论文
共 50 条
  • [41] Magnetic structure and properties of a bulk Fe72Al5P10Ga2C6B4Si1 alloy in the amorphous and nanocrystalline states
    G. E. Abrosimova
    A. S. Aronin
    Yu. P. Kabanov
    D. V. Matveev
    V. V. Molokanov
    [J]. Physics of the Solid State, 2004, 46 : 885 - 890
  • [42] Stability and properties of alloyed ε-(Fe1-xMx)3N nitrides (M = Cr, Ni, Mo, V, Co, Nb, Mn, Ti and Cu): A first-principles calculations
    Zhang, C. S.
    Yan, M. F.
    You, Y.
    Che, H. T.
    Zhang, F. Y.
    Bai, B.
    Chen, L.
    Long, Z.
    Li, R. W.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 615 : 854 - 862
  • [43] Investigation of the thermal and magnetic properties of Fe61Co10Zr2 Fe61Co10Zr2.5Hf2.5Me2W2B20 (Me = Y, Nb, W, Ti, Mo, Ni) bulk amorphous alloys obtained by an induction suction method
    Nabialek, Marcin G.
    Dospial, Marcin J.
    Szota, Michal
    Pietrusiewicz, Pawel
    Jedryka, Jaroslaw
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (07) : 3382 - 3386
  • [44] Formation mechanism of ultrafine M7C3 carbide in a hypereutectic Fe-25Cr-4C-0.5Ti-0.5Nb-0.2N-2LaAlO3 hardfacing alloy layer
    Wang, Jibo
    Xing, Xiaolei
    Zhou, Yefei
    Liu, Shaocun
    Qi, Xiaowen
    Yang, Qingxiang
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 7711 - 7720
  • [45] Formation and properties of the new Al8V10W16O85 and Fe8−xAlxV10W16O85 phases with the M–Nb2O5 structure
    Piotr Tabero
    [J]. Journal of Thermal Analysis and Calorimetry, 2010, 101 : 561 - 566
  • [46] Mechanosynthesis, characterization, and cytotoxic evaluation of soft ferromagnetic non-equiatomic high entropy alloys in the system Al10+xM12-xFe35Mn23Ni20 (M = Cr, Mo; x=0, 0.2)
    Garcia-Mendoza, T.
    Enriquez, J. B. Martinez
    Rosado, D. Ordaz
    Zamora, J.
    Pena-Rico, M. A.
    Navarro-Mtz, A. K.
    Cruz-Nolasco, A.
    Martinez-Garcia, A.
    Garay-Reyes, C. G.
    Vasquez-Victorio, G.
    Cortes-Lopez, A. J.
    Castillo, F. Chinas
    Juarez-Arellano, E. A.
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 2025, 337
  • [47] Microwave dielectric properties of Li3Mg2NbO6-based ceramics with (MxW1-x)5+(M = Li+, Mg2+, Al3+, Ti4+) substitutions at Nb5+sites
    Zhang, Ping
    Hao, Manman
    Xiao, Mi
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 853
  • [48] Scaffolds of magnetically active 3d metals in the valence electron controlled borides Ti9-xM2+xRu18B8 (M=Cr Ni; x=0.5-1): Structutral, electronic and magnetic properties
    Goerens, Christian
    Brgoch, Jakoah
    Miller, Gordon J.
    Fokwa, Boniface P. T.
    [J]. JOURNAL OF SOLID STATE CHEMISTRY, 2013, 204 : 283 - 290
  • [49] Preparation, characterization and conductivity of NASICON-type Li1+xM(III)xTi2-x(PO4)3 (M(III) = Al, Cr, Fe; 0.5 ≤ x ≤ 2.0) materials via modern, scalable synthesis routes
    Rossbach, A.
    Neitzel-Grieshammer, S.
    [J]. OPEN CERAMICS, 2022, 9
  • [50] Statistics of oxidation resistance of Ni-(0-15)Co-(8-15)Cr-(0-5)Mo-(0-10)W-(3-8)Al-(0-5)Ti-(0-10)Ta-0.1C-0.01B superalloys at 1000 °C by compositional variations
    Park, Si-Jun
    Lee, Kyu-Hyuk
    Seo, Seong-Moon
    Jeong, Hi-Won
    Yoo, Young-Soo
    Jang, HeeJin
    [J]. RARE METALS, 2020, 39 (08) : 918 - 927