Influence of wire feeding speed on the melting behavior and formation of narrow-gap joint by laser welding with filler wire

被引:15
|
作者
Pu, Jihong [1 ]
Zhao, Yong [1 ]
Jiang, Yumo [1 ]
Zou, Jiasheng [1 ]
Song, Shuming [2 ]
机构
[1] Jiangsu Univ Sci & Technol, Prov Key Lab Adv Welding Technol, 2 Mengxi Rd, Zhenjiang 212003, Jiangsu, Peoples R China
[2] Jiangsu Yangzi Mitsui Shipbldg Co Ltd, Taicang 215400, Jiangsu, Peoples R China
关键词
laser welding; wire feeding speed; melting behavior; droplet transition; weld defects; DROPLET TRANSFER; MECHANICAL-PROPERTIES; THICK PLATE; MICROSTRUCTURE;
D O I
10.2351/7.0000043
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The influence of wire feeding speed during laser welding with a filling wire was investigated by high-speed imaging and mechanical analysis of the droplet. A force relationship was found to analyze the droplet transition behavior at the end of the welding wire in the narrow-gap groove. Welding defects, mainly including nonfusion and porosity, were studied to reveal the formation mechanism and propose affective solutions. In this paper, it was found that the droplet transition was determined by the position of the melting end of the wire in the narrow-gap groove under the same parameters. The sidewall transition, the liquid bridge transition, and the spreading transition were found at different wire feeding speeds. As the wire feeding speed increases from 3 to 6 m/min, the weld depth increased 40%, the maximum weld width decreased 16%, and the minimum weld width increased 8%. More nonfusion and porosity defects and poor weld formation would appear at excessive wire feeding speed.
引用
收藏
页数:9
相关论文
共 50 条
  • [1] Influence of the magnetic field on the melting and solidification behavior of narrow-gap laser welding with filler wire
    Fu, Juan
    Zhao, Yong
    Zou, Jiasheng
    Liu, Xin
    Pan, Yanfei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 123 (3-4) : 1123 - 1131
  • [2] Influence of the magnetic field on the melting and solidification behavior of narrow-gap laser welding with filler wire
    Juan Fu
    Yong Zhao
    Jiasheng Zou
    Xin Liu
    Yanfei Pan
    The International Journal of Advanced Manufacturing Technology, 2022, 123 : 1123 - 1131
  • [3] Melting behavior in ultrasonic-assisted narrow-gap laser welding with filler wire
    Chen, Xiang
    Fu, Juan
    Zhao, Yong
    Jiang, Yumo
    Yan, Keng
    Jiang, Caiping
    Chen, Jinlu
    JOURNAL OF LASER APPLICATIONS, 2021, 33 (01)
  • [4] Narrow-gap laser welding using filler wire of thick steel plates
    Yong Zhao
    Shengchong Ma
    Jian Huang
    Yixiong Wu
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 2955 - 2962
  • [5] Narrow-gap laser welding using filler wire of thick steel plates
    Zhao, Yong
    Ma, Shengchong
    Huang, Jian
    Wu, Yixiong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (5-8) : 2955 - 2962
  • [6] Dynamic Characteristics of Plasma in Ultrasonic-Assisted Narrow-Gap Laser Welding with Filler Wire
    Wang, Ren
    He, Zhenxing
    Kan, Xiaoyang
    Li, Ke
    Chen, Fugang
    Fu, Juan
    Zhao, Yong
    MATERIALS, 2023, 16 (02)
  • [7] Investigation of filler wire melting and transfer behaviors in laser welding with filler wire
    Huang, Wenhao
    Chen, Shujun
    Xiao, Jun
    Jiang, Xiaoqing
    Jia, Yazhou
    OPTICS AND LASER TECHNOLOGY, 2021, 134
  • [8] Microstructure and Properties of 40 mm-thick TC4 Titanium Alloy Welded Joint by Narrow-gap Laser Welding with Filler Wire
    Xu K.
    Lei Z.
    Huang R.
    Yin L.
    Fang N.
    Zou J.
    Cao H.
    Cailiao Daobao/Materials Reports, 2022, 36 (02):
  • [9] Droplet transfer behavior of narrow gap laser wire filling welding
    Zhang, Z.
    Wang, R.
    Gou, G.
    Chen, H.
    Gao, W.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2019, 33 (1-3):
  • [10] Multi-pass laser welding of thick plate with filler wire by using a narrow gap joint configuration
    Yu, Y. C.
    Yang, S. L.
    Yin, Y.
    Wang, C. M.
    Hu, X. Y.
    Meng, X. X.
    Yu, S. F.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2013, 27 (07) : 2125 - 2131