Microcasting of Al bronze:: influence of casting parameters on the microstructure and the mechanical properties

被引：16

作者：

Baumeister, Gundi ^{[1
]}

Okolo, Brando ^{[2
]}

Roegner, Joachim ^{[2
]}

机构：

[1] Forschungszentrum Karlsruhe, Inst Mat Res IMF III, D-76021 Karlsruhe, Germany

[2] Univ Karlsruhe TH, Inst Werkstoffkunde 1, D-76131 Karlsruhe, Germany

来源：

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS | 2008年 / 14卷 / 9-11期

关键词：

D O I：

10.1007/s00542-008-0605-4

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In this work the influence of the casting parameters on the microstructure and the mechanical properties of extremely small parts produced by microcasting was investigated. Different specimens were cast using an aluminum bronze with a composition defined by DIN EN 17 665. It was found that the yield stress and the ultimate tensile strength of micro-tensile test specimens increase when decreasing the mold temperature from 1,000 to 700 degrees C. This correlates with the increasing fineness of the microstructure. Additionally, the investigation showed that the mechanical strength of micro-specimens is higher than the one of macro-specimens cast at the same mold temperature due to a finer microstructure which hinders dislocation movement.

引用

页码：1647 / 1655

页数：9

共 9 条

[1] Auhorn M, 2002, MICROSYST TECHNOL, V8, P109, DOI [10.1007/s00542-001-0131-0, 10.1007/S00542-001-0131-0]
[2] Baumeister G, 2005, ADV MICRO NANOSYST, V4, P357, DOI 10.1002/9783527616732.ch1
[3] Replication of LIGA structures using microcasting
Baumeister, G
Ruprecht, R
Hausselt, J
[J]. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2004, 10 (6-7): : 484 - 488
[4] Microcasting of parts made of metal alloys
Baumeister, G
Ruprecht, R
Hausselt, J
[J]. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2004, 10 (03): : 261 - 264
[5] MICROSTRUCTURAL CHARACTERIZATION OF CAST NICKEL ALUMINUM BRONZE
CULPAN, EA
ROSE, G
[J]. JOURNAL OF MATERIALS SCIENCE, 1978, 13 (08) : 1647 - 1657
[6] *GOM MBH, 2006, AR MAN AR 5 4
[7] MEIGH H, 2000, CAST WROUGHT ALUMIMI, P296
[8] Focused ion beam study of the effects of shot peening on the subsurface microstructure of normalized pearlitic steel
Okolo, Brando
Perez-Willard, Fabian
Hawecker, Jacques
Gerthsen, Dagmar
Wanner, Alexander
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 183 (2-3) : 160 - 164
[9] Wear of aluminium bronze in sliding contact with lubricated stainless steel sheet material
van der Heide, E.
Stam, E. D.
Giraud, H.
Lovato, G.
Akdut, N.
Clarysse, F.
Caenen, P.
Heikilla, I.
[J]. WEAR, 2006, 261 (01) : 68 - 73

← 1 →