Effects of temperature and in-office bleaching agents on surface and subsurface properties of aesthetic restorative materials

被引:17
作者
Yu, Hao [1 ]
Li, Qing [2 ]
Wang, Yi-ning [2 ]
Cheng, Hui [1 ]
机构
[1] Fujian Med Univ, Sch & Hosp Stomatol, Dept Prosthodont, Fuzhou 350002, Peoples R China
[2] Wuhan Univ, Sch & Hosp Stomatol, Dept Prosthodont, Wuhan, Peoples R China
基金
中国国家自然科学基金;
关键词
Environmental temperature; Tooth bleaching; Hydrogen peroxide; Substance loss; Microhardness; CARBAMIDE PEROXIDE; TOOTH; COMPOSITE; LIGHT; MICROHARDNESS; ROUGHNESS; HARDNESS; COLOR; VITRO;
D O I
10.1016/j.jdent.2013.07.015
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Objectives: To investigate the effects of in-office bleaching agents on surface and subsurface properties of dental materials at different environmental temperatures. Methods: Four composite resins, a compomer, a conventional glass-ionomer cement (CGIC), and an industrially sintered ceramic material were evaluated in the present study. Four groups of each material (n = 10) were treated: bleaching with 40% hydrogen peroxide at 25 degrees C and 37 degrees C, stored in artificial saliva at 25 degrees C and 37 degrees C. The specimens from bleaching groups were bleached for two sessions, each of two 20 min application, at respective temperatures. After bleaching, the surface and subsurface (0.1-0.5 mm) microhardness were evaluated using a Vickers microhardness tester. The substance loss was determined by surface profilometry. The data were statistically analyzed with ANOVA and the Tukey's post hoc test. Results: All materials were found to have surface softening after bleaching, and bleaching effects on surface micorhardness increased at 37 degrees C compared with 25 degrees C, except for the ceramic. After being bleached at 37 degrees C, the microhardness values of flowable composite resin significantly reduced at a depth of 0.1 mm compared with control specimen stored at 37 degrees C. No significant difference was found between the control and bleached specimens with respect to substance loss for any of the materials. Conclusion: The influence of environmental temperature on the in-office bleaching effects on surface and subsurface microhardness of dental materials was material-dependent. However, no substance loss was detected due to the tested bleaching regimen. Clinical significance: Environmental temperature should be considered when evaluating the possible bleaching effects on restorative materials. Moreover, dentists should be aware that there might be a need for polishing of restorative materials in clinical situations in which restorations are accidentally exposed to bleaching gels. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1290 / 1296
页数:7
相关论文
共 50 条
  • [21] Effects of in-office bleaching agents on polished and unpolished nanofilled resin composite
    Kayalidere, Ezgi Erden
    Dorter, Can
    [J]. JOURNAL OF THE AMERICAN DENTAL ASSOCIATION, 2023, 154 (07) : 592 - 600
  • [22] Effects of External Bleaching on Restorative Materials: A Review
    El-Murr, Jessica
    Ruel, Denys
    St-Georges, Annie J.
    [J]. JOURNAL OF THE CANADIAN DENTAL ASSOCIATION, 2011, 77
  • [23] Effects of intracoronal bleaching agents on the surface properties of mineral trioxide aggregate
    Kalay, Tugba Serin
    [J]. ODONTOLOGY, 2019, 107 (04) : 465 - 472
  • [24] Effect of home and in-office bleaching systems on the nanomechanical properties of tooth enamel
    Yami, Abdurhman Abu-saq Al
    Qahtani, Saleh Al
    Shokair, Nada
    Ghamdi, Mohammed Al
    Bouni, Roula Al
    [J]. SAUDI DENTAL JOURNAL, 2020, 32 (07) : 343 - 348
  • [25] Effect of an In-Office Bleaching Agent with Surface Pre-Reacted Glass-Ionomer Filler on the Enamel Surface: A In-Vitro Study
    Shimojima, Mika
    Hiraishi, Noriko
    Akabane, Kodai
    Nassar, Mohannad
    Otsuki, Masayuki
    Shimada, Yasushi
    [J]. JOURNAL OF FUNCTIONAL BIOMATERIALS, 2023, 14 (07)
  • [26] Effect of Er, Cr:YSGG laser on the surface of composite restoratives during in-office tooth bleaching
    Dionysopoulos, Dimitrios
    Strakas, Dimitrios
    Tsitrou, Effrosyni
    Tolidis, Kosmas
    Koumpia, Effimia
    [J]. LASERS IN MEDICAL SCIENCE, 2016, 31 (05) : 875 - 882
  • [27] The effect of in-office bleaching agents on the Vickers hardness and surface topography of polished and unpolished CAD/CAM composite materials
    Alamoush, Rasha A.
    Yang, Jiawei
    Alhotan, Abdulaziz
    Haider, Julfikar
    Matinlinna, Jukka P.
    Elraggal, Alaaeldin
    [J]. SCIENTIFIC REPORTS, 2023, 13 (01)
  • [28] Evaluation of the mineral-promoting effects of in-office bleaching on experimental subsurface enamel lesions
    Iizuka, Junko
    Kunimatsu, Yuichi
    Mikuni-Takagaki, Yuko
    Mukai, Yoshiharu
    [J]. DENTAL MATERIALS JOURNAL, 2022, 41 (04) : 589 - 594
  • [29] Influence of Staining Solutions on Color Change and Enamel Surface Properties During At-home and In-office Dental Bleaching: An In Situ Study
    Carlos, N. R.
    Pinto, A. V. D.
    do Amaral, F. L. B.
    Franca, F. M. G.
    Turssi, C. P.
    Basting, R. T.
    [J]. OPERATIVE DENTISTRY, 2019, 44 (06) : 595 - 608
  • [30] Effects of Two In-Office Bleaching Agents with Different Compositions on the Bond Strength to Enamel
    Marski, Silvia Renata
    Ramos da Silva, Thamires Fortes
    Andrade Balduino, Maria Luiza
    de Lima, Carolina Oliveira
    Simao, Renata Antoun
    Prado, Maira
    [J]. INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY, 2022, 42 (05) : 675 - 681