In-situ integrated fabrication of Ti-Ni coating during hot isostatic pressing of Ti6Al4V parts: Microstructure and tribological behavior

被引：12
作者：
Cai, Chao [1 ]
Song, Bo [1 ]
Wei, Qingsong [1 ]
Xue, Pengju [1 ]
Wen, Shifeng [1 ]
Liu, Jie [1 ]
Shi, Yusheng [1 ]
机构：
[1] Huazhong Univ Sci & Technol, State Key Lab Mat Proc & Die & Mould Technol, Wuhan 430074, Peoples R China
来源：
SURFACE & COATINGS TECHNOLOGY | 2015年 / 280卷
关键词：
Hot isostatic pressing; Ti6Al4V; Ti-Ni coating; Wear resistance; COMPOSITE COATINGS; MATERIALS SCIENCE; PLASMA; ALLOYS; TEMPERATURE; PERFORMANCE; SPRAY; SIZE;
D O I：
10.1016/j.surfcoat.2015.09.007
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The coating manufacture on the complex-shaped parts still has many technical difficulties in the real industry. In this study, the Ti-Ni coating was in-situ manufactured during hot isostatic pressing of Ti6Al4V parts. The prepared coating was characterized in terms of microstructure, element distribution, phase composition as well as the mechanical properties, including microhardness and wear resistance. The present work preliminarily verified that hot isostatic pressing could be considered as a candidate for integrated manufacturing complex-shaped Ti6Al4V components with a wear-resistant coating. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：194 / 200
页数：7
相关论文
共 35 条
  • [1] Microstructural characterization of HVOF/plasma thermal spray of micro/nano WC-12%Co powders
    Al-Mutairi, Sultan
    Hashmi, M. S. J.
    Yilbas, B. S.
    Stokes, J.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2015, 264 : 175 - 186
  • [2] High performance and high complexity net shape parts for gas turbines:: the ISOPREC® powder metallurgy process
    Baccino, R
    Moret, F
    Pellerin, F
    Guichard, D
    Raisson, G
    [J]. MATERIALS & DESIGN, 2000, 21 (04): : 345 - 350
  • [3] Hot isostatic pressing of near net shape components - process fundamentals and future challenges
    Broeckmann, Christoph
    [J]. POWDER METALLURGY, 2012, 55 (03) : 176 - 179
  • [4] Influence of plasma and cold spray deposited Ti Layers on high-cycle fatigue properties of Ti6Al4V substrates
    Cizek, Jan
    Kovarik, Ondrej
    Siegl, Jan
    Khor, Khiam Aik
    Dlouhy, Ivo
    [J]. SURFACE & COATINGS TECHNOLOGY, 2013, 217 : 23 - 33
  • [5] Producing net-shape products by powder metallurgy
    Cooper, KP
    [J]. JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1999, 51 (07): : 25 - 25
  • [6] Processing and characterization of CYSZ/Al2O3 and CYSZ/Al2O3 + YSZ multilayered thermal barrier coatings
    Dokur, Mehmet Mumtaz
    Goller, Gultekin
    [J]. SURFACE & COATINGS TECHNOLOGY, 2014, 258 : 804 - 813
  • [7] On the Deformation of Superelastic TiNi Alloy
    Farhat, Z.
    Zhang, C.
    [J]. TRIBOLOGY LETTERS, 2010, 37 (02) : 169 - 173
  • [8] Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy
    Gao, F.
    Wang, H. M.
    [J]. INTERMETALLICS, 2008, 16 (02) : 202 - 208
  • [9] Effect of bond coat and post-heat treatment on the adhesion of air plasma sprayed WC-Co coatings
    Ghadami, F.
    Sohi, M. Heydarzadeh
    Ghadami, S.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2015, 261 : 289 - 294
  • [10] HOT-ISOSTATIC PRESSING DIAGRAMS - NEW DEVELOPMENTS
    HELLE, AS
    EASTERLING, KE
    ASHBY, MF
    [J]. ACTA METALLURGICA, 1985, 33 (12): : 2163 - 2174
1234