High Strength and Good Ductility in Cu-3Ag-0.5Zr Alloy by Cryo-Rolling and Aging

被引:10
作者
Krishna, S. Chenna [1 ]
Chawake, Niraj [2 ]
Kottada, Ravi Sankar [2 ]
Jha, Abhay K. [1 ]
Pant, Bhanu [1 ]
Venkitakrishnan, P. V. [1 ]
机构
[1] Vikram Sarabhai Space Ctr, Mat & Mech Ent, Trivandrum 695022, Kerala, India
[2] IIT Madras, Dept Met & Mat Engn, Chennai 600036, Tamil Nadu, India
关键词
aging; cryo-rolling; Cu-Ag-Zr alloys; high strength; SEVERE PLASTIC-DEFORMATION; STACKING-FAULT ENERGY; GRAINED CU-ZN; MECHANICAL-PROPERTIES; TENSILE DUCTILITY; ELECTRICAL-CONDUCTIVITY; COLD-WORKING; MICROSTRUCTURE; METALS; COPPER;
D O I
10.1007/s11665-016-2419-3
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A combination of high strength and good ductility was achieved in a precipitation hardenable Cu-3Ag-0.5Zr alloy through cryo-rolling (80% reduction in thickness) and aging in the temperature range (200-500 A degrees C). The high-strength sheets produced by cryo-rolling showed a threefold increase in yield strength compared to that of the solution-treated and aged (220 MPa) sample, while retaining good ductility. An optimum combination of high strength (614 MPa) and ductility (8%) was achieved by 80% cryo-rolling and aging at 320 A degrees C for 1 h. The high strength and good ductility obtained was attributed to various microstructural factors such as deformation twins, ultra-fine grains, high dislocation density and fine nano-sized silver precipitates.
引用
收藏
页码:350 / 357
页数:8
相关论文
共 50 条
  • [21] RT ECAP and rolling bestow high strength and good ductility on a low lithium aluminum alloy
    Chen, Yumeng
    Wu, Yuna
    Li, Yun
    Peng, Zhiyang
    Liu, Huan
    Ma, Aibin
    Jiang, Jinghua
    Yuan, Ting
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 : 5561 - 5574
  • [22] Improvement in Mechanical Properties of a Cu-2.0mass%Ni-0.5mass%Si-0.1mass%Zr Alloy by Combining Both Accumulative Roll-Bonding and Cryo-Rolling with Aging
    Takagawa, Yusaku
    Tsujiuchi, Yukinaru
    Watanabe, Chihiro
    Monzen, Ryoichi
    Tsuji, Nobuhiro
    MATERIALS TRANSACTIONS, 2013, 54 (01) : 1 - 8
  • [23] Optimization of strength, ductility and electrical conductivity of Cu-Cr-Zr alloy by combining multi-route ECAP and aging
    Purcek, G.
    Yanar, H.
    Demirtas, M.
    Alemdag, Y.
    Shangina, D. V.
    Dobatkin, S. V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 649 : 114 - 122
  • [24] Achieving ultra-high strength in a face-centered-cubic FeCrCoNi high entropy alloy through dense nanotwins bundles structure prepared by cryo-rolling
    Zeng, Longfei
    Zeng, Luming
    Gao, Rui
    You, Chaoping
    Liu, Baixiong
    INTERMETALLICS, 2022, 148
  • [25] Strengthening in high strength Cu-Cr-Zr-Ti alloy plates produced by hot rolling
    Krishna, S. Chenna
    Rao, G. Sudarsana
    Jha, Abhay K.
    Pant, Bhanu
    Venkitakrishnan, P. V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 674 : 164 - 170
  • [26] Optimizing the strength, ductility and electrical conductivity of a Cu-Cr-Zr alloy by rotary swaging and aging treatment
    Huang, A. H.
    Wang, Y. F.
    Wang, M. S.
    Song, L. Y.
    Li, Y. S.
    Gao, L.
    Huang, C. X.
    Zhu, Y. T.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 746 (211-216): : 211 - 216
  • [27] High strength and good ductility of casting Al-Cu alloy modified by PrxOy and LaxOy
    Zhao, Hailong
    Yao, Dongming
    Qiu, Feng
    Xia, Yumei
    Jiang, Qichuan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (05) : L43 - L46
  • [28] A bimodal grain structured Zn-0.5Ag-0.2Mg alloy with high strength and ductility achieved through combined ECAP and cold rolling
    Zhao, Liyan
    Zhuo, Xiaoru
    Gao, Wei
    Zhao, Shulin
    Liu, Huan
    Hu, Zhichao
    Zhang, Peng
    Wu, Yuna
    Jiang, Jinghua
    Ma, Aibin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 3222 - 3234
  • [29] Development of High Strength and High Conductivity Cu-Ag-Zr Alloy
    Cho, Hoon
    PRICM 7, PTS 1-3, 2010, 654-656 : 1323 - 1326
  • [30] High Strength, Utilizable Ductility and Electrical Conductivity in Cold Rolled Sheets of Cu-Cr-Zr-Ti Alloy
    Krishna, S. Chenna
    Karthick, N. K.
    Rao, G. Sudarshan
    Jha, Abhay K.
    Pant, Bhanu
    Cherian, Roy M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (02) : 787 - 793