High Strength and Good Ductility in Cu-3Ag-0.5Zr Alloy by Cryo-Rolling and Aging

被引：10
|
作者：
Krishna, S. Chenna [1 ]
Chawake, Niraj [2 ]
Kottada, Ravi Sankar [2 ]
Jha, Abhay K. [1 ]
Pant, Bhanu [1 ]
Venkitakrishnan, P. V. [1 ]
机构：
[1] Vikram Sarabhai Space Ctr, Mat & Mech Ent, Trivandrum 695022, Kerala, India
[2] IIT Madras, Dept Met & Mat Engn, Chennai 600036, Tamil Nadu, India
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2017年 / 26卷 / 01期
关键词：
aging; cryo-rolling; Cu-Ag-Zr alloys; high strength; SEVERE PLASTIC-DEFORMATION; STACKING-FAULT ENERGY; GRAINED CU-ZN; MECHANICAL-PROPERTIES; TENSILE DUCTILITY; ELECTRICAL-CONDUCTIVITY; COLD-WORKING; MICROSTRUCTURE; METALS; COPPER;
D O I：
10.1007/s11665-016-2419-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A combination of high strength and good ductility was achieved in a precipitation hardenable Cu-3Ag-0.5Zr alloy through cryo-rolling (80% reduction in thickness) and aging in the temperature range (200-500 A degrees C). The high-strength sheets produced by cryo-rolling showed a threefold increase in yield strength compared to that of the solution-treated and aged (220 MPa) sample, while retaining good ductility. An optimum combination of high strength (614 MPa) and ductility (8%) was achieved by 80% cryo-rolling and aging at 320 A degrees C for 1 h. The high strength and good ductility obtained was attributed to various microstructural factors such as deformation twins, ultra-fine grains, high dislocation density and fine nano-sized silver precipitates.
引用
收藏
页码：350 / 357
页数：8
相关论文
共 50 条
  • [1] High Strength and Good Ductility in Cu-3Ag-0.5Zr Alloy by Cryo-Rolling and Aging
    S. Chenna Krishna
    Niraj Chawake
    Ravi Sankar Kottada
    Abhay K. Jha
    Bhanu Pant
    P. V. Venkitakrishnan
    Journal of Materials Engineering and Performance, 2017, 26 : 350 - 357
  • [2] Tailoring the strength and ductility of Al0.25CoCrFeNi high entropy alloy through cryo-rolling and annealing
    Liu, Min
    Zhang, Shidong
    Li, Fangjie
    Luo, Yun
    Yao, Yilin
    Zhang, Haochen
    Wang, Zemin
    Wang, Lianbo
    Wang, Zhanyong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 826
  • [3] Effects of cold rolling and low-temperature annealing on microstructure and mechanical properties of rapidly solidified Cu-3Ag-0.5Zr alloy
    Wu, Xiang
    Wang, Richu
    Peng, Chaoqun
    Feng, Yan
    Cai, Zhiyong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773
  • [4] High-Temperature Tensile Behavior of Cu-3Ag-0.5Zr Alloy in the Solution-Treated Condition
    Krishna, S. Chenna
    Karthick, N. K.
    Kumar, Ravi Ranjan
    Jha, Abhay K.
    Pant, Bhanu
    Cherian, Roy M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (12) : 7359 - 7363
  • [5] Enhancement in Strength of a Cu-1.4 mass%Ni-0.25 mass%P-0.1 mass%Zr Alloy by Cryo-Rolling and Aging
    Tsujiuchi, Y.
    Kita, K.
    Watanabe, C.
    Monzen, R.
    Tsuji, N.
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2013, 77 (02) : 55 - 58
  • [6] Optimization of strength, ductility and electrical conductivity of a Cu-Cr-Zr alloy by cold rolling and aging treatment
    Meng, Ao
    Nie, Jinfeng
    Wei, Kang
    Kang, Huijun
    Liu, Zhuangjia
    Zhao, Yonghao
    VACUUM, 2019, 167 : 329 - 335
  • [7] Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing
    Bhattacharjee, T.
    Wani, I. S.
    Sheikh, S.
    Clark, I. T.
    Okawa, T.
    Guo, S.
    Bhattacharjee, P. P.
    Tsuji, N.
    SCIENTIFIC REPORTS, 2018, 8
  • [8] Microstructure Evolution in a Cu-0.5Cr-0.2Zr Alloy Subjected to Equal Channel Angular Pressing, Rolling or Aging
    Alexandrov, Igor V.
    Sitdikov, Vil D.
    Abramova, Marina M.
    Sarkeeva, Elena A.
    Wei, Kun Xia
    Wei, Wei
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (10) : 4303 - 4309
  • [9] Microstructures and elevated temperature properties of rapidly solidified Cu-3Ag-0.5Zr and Cu-3Ag-0.5Zr-0.4Cr-0.35Nb alloys
    Wu, Xiang
    Wang, Richu
    Peng, Chaoqun
    Feng, Yan
    Cai, Zhiyong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 803 : 1037 - 1044
  • [10] Microstructure evolution and mechanical properties for rapidly solidified Cu-3Ag-0.5Zr alloy during isothermal compression
    Lv, Guoliang
    Feng, Yan
    Wang, Richu
    Peng, Chaoqun
    Wu, Xiang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 800
12345