Local and distortional buckling of thin-walled short columns

This paper assesses the applicability of Eurocode 3 (EC3) to the prediction of the compression capacity of short fixed-ended columns with different cross-sections. This compression capacity is determined by combining the effective width of plane elements due to local buckling and the effective stiffener thickness due to distortional buckling. Numerical calculations have been carried out in order to compare alternative methods for determining the minimum elastic distortional buckling stress in compression. The method given in EC3 does not correlate as well as Lau and Hancock's method with the results given by Generalized Beam Theory (GBT). The end boundary conditions have a significant influence on the distortional buckling strength, and thus also on the compression capacity of short columns. Selected experimental results from compression tests on C-, Hat- and rack upright-sections are compared with the predictions given by EC3. The procedure in EC3 was modified by determining the distortional buckling stress using GET, taking into account the actual column length and the end boundary conditions, This lead to better agreement between the experimental results and the theoretical predictions. (C) 1999 Elsevier Science Ltd. All rights reserved.