Analysis of Texture and Microstructure of Annealed Fe-23Mn-3Si-3Al Steel

被引：0
|
作者：
Kowalska, J. [1 ]
机构：
[1] AGH Univ Sci & Technol, Fac Met Engn & Ind Comp Sci, Krakow, Poland
来源：
ACTA PHYSICA POLONICA A | 2016年 / 130卷 / 04期
关键词：
MARTENSITIC-TRANSFORMATION; DEFORMATION; BEHAVIOR; ALLOY;
D O I：
10.12693/APhysPolA.130.946
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
Texture and microstructural examinations of Fe-23% Mn-3% Si-3%Al (mass%) alloy are presented. After casting the ingot was homogenized at 1150 degrees C, hot-rolled in the temperature range 1200 degrees C-900 degrees C and then cold-rolled. Steel samples, after 40% deformation, were annealed at 300 degrees C for 10 min, 600 degrees C and 750 degrees C for 30 min. X-ray diffraction and metallographic studies revealed deformation-induced mechanical twinning and phase transformation. The crystallographic Shoji-Nishiyama and Kurdjumov-Sachs relations between martensite (epsilon, alpha') and austenite (gamma), were found in the cold-rolled material. During annealing the reverse martensite to austenite transformation occurred.
引用
收藏
页码：946 / 949
页数：4
相关论文
共 50 条
  • [31] Positive Strain Rate Sensitivity and Deformation Behavior of a Fe-29Mn-3Al-3Si TWIP Steel
    Shen, Shucheng
    Wu, Cuilan
    Xie, Pan
    Liu, Yuanrui
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2022, 35 (11) : 1825 - 1836
  • [32] Hot deformation behavior of an austenitic Fe-20Mn-3Si-3Al transformation induced plasticity steel
    Li, Dejun
    Feng, Yaorong
    Yin, Zhifu
    Shangguan, Fengshou
    Wang, Ke
    Liu, Qiang
    Hu, Feng
    MATERIALS & DESIGN, 2012, 34 : 713 - 718
  • [33] Smelting and casting technologies of Fe-25Mn-3Al-3Si twinning induced plasticity steel for automobiles
    Kang-wei Li
    Chang-ling Zhuang
    Jian-hua Liu
    Shao-bo Shen
    Yi-long Ji
    Zhi-biao Han
    Journal of Iron and Steel Research International, 2015, 22 : 75 - 79
  • [34] Effect of Niobium on Precipitates and Texture Evolution of Fe-3% Si Grain-oriented Electrical Steel Annealed Hot Band
    Hou, Ruogu
    Zhu, Chengyi
    Li, Guangqiang
    Zhou, Bowen
    Jia, Juan
    ISIJ INTERNATIONAL, 2017, 57 (12) : 2245 - 2254
  • [35] Microstructure and Texture Evolution of Strip-Cast and Hot-Rolled Fe-3 %Si Steel Sheet
    Wu S.
    Chen A.
    Liu H.
    Liu Z.
    Li H.
    Wang G.
    Wu, Shengjie, 1600, Springer Science and Business Media, LLC (03): : 390 - 396
  • [36] Effect of annealing time on microstructure and mechanical properties of Fe-C-Mn-Al-Si steel
    Xu, Junjie
    Zheng, Wei
    Jing, Cainian
    Lin, Tao
    Li, Ning
    Zhai, Tongguang
    MATERIALS SCIENCE AND TECHNOLOGY, 2024, 40 (05) : 377 - 386
  • [37] Effect of Asymmetric Hot Rolling on the Texture Evolution of Fe–3%Si Steel
    Tae-Wook Na
    Hyung-Ki Park
    Chang-Soo Park
    Hyung-Don Joo
    Jong-Tae Park
    Heung Nam Han
    Nong-Moon Hwang
    Metals and Materials International, 2018, 24 : 1369 - 1375
  • [38] Anomalous Dilatometric Response in Fe–Mn–Al–Si Steel
    S. K. Ghosh
    Journal of The Institution of Engineers (India): Series D, 2012, 93 (1) : 1 - 5
  • [39] An Experimental Investigation on Microstructure and Mechanical Property of Asymmetric Warm-Rolled Fe-27Mn-3Si-4Al TWIP Steel
    Lv, Wei
    Gu, Yuheng
    Huang, Yanru
    Cai, Guojun
    Misra, R. D. K.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (15) : 6704 - 6716
  • [40] Corrosion Behavior and Microstructure of Stir Zone in Fe-30Mn-3Al-3Si Twinning-Induced Plasticity Steel after Friction Stir Welding
    Kim, Hye-Jin
    Fujii, Hidetoshi
    Lee, Seung-Joon
    METALS, 2020, 10 (11) : 1 - 15
12345