Analysis of Texture and Microstructure of Annealed Fe-23Mn-3Si-3Al Steel

被引：0
|
作者：
Kowalska, J. [1 ]
机构：
[1] AGH Univ Sci & Technol, Fac Met Engn & Ind Comp Sci, Krakow, Poland
来源：
ACTA PHYSICA POLONICA A | 2016年 / 130卷 / 04期
关键词：
MARTENSITIC-TRANSFORMATION; DEFORMATION; BEHAVIOR; ALLOY;
D O I：
10.12693/APhysPolA.130.946
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
Texture and microstructural examinations of Fe-23% Mn-3% Si-3%Al (mass%) alloy are presented. After casting the ingot was homogenized at 1150 degrees C, hot-rolled in the temperature range 1200 degrees C-900 degrees C and then cold-rolled. Steel samples, after 40% deformation, were annealed at 300 degrees C for 10 min, 600 degrees C and 750 degrees C for 30 min. X-ray diffraction and metallographic studies revealed deformation-induced mechanical twinning and phase transformation. The crystallographic Shoji-Nishiyama and Kurdjumov-Sachs relations between martensite (epsilon, alpha') and austenite (gamma), were found in the cold-rolled material. During annealing the reverse martensite to austenite transformation occurred.
引用
收藏
页码：946 / 949
页数：4
相关论文
共 50 条
  • [21] Prediction of hot deformation behaviour of Fe-25Mn-3Si-3Al TWIP steel
    Li, Dejun
    Feng, Yaorong
    Yin, Zhifu
    Shangguan, Fengshou
    Wang, Ke
    Liu, Qiang
    Hu, Feng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (28): : 8084 - 8089
  • [22] Twins observation during deformation of Fe-28Mn-3Si-3Al TWIP steel
    Mi, Zhen-Li
    Tang, Di
    Jiang, Hai-Tao
    Dai, Yong-Juan
    Wang, Hai-Quan
    Kang T'ieh/Iron and Steel (Peking), 2007, 42 (12): : 73 - 76
  • [23] The Studies of Texture in Cold Rolled and Annealed Sheets of Mn-Al Steel
    Krzton, Hanna J.
    Kuc, Dariusz
    Kania, Zofia
    APPLIED CRYSTALLOGRAPHY XXII, 2013, 203-204 : 38 - +
  • [24] Analysis of texture evolution in cold rolled and annealed 3%Si-Fe (100)[011] single crystal
    Toge, T
    Muraki, M
    Komatsubara, M
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 3703 - 3708
  • [25] Microstructure and crystallographic texture of rolled polycrystalline Fe3Al
    Raabe, D
    Keichel, J
    Sun, Z
    JOURNAL OF MATERIALS SCIENCE, 1996, 31 (02) : 339 - 344
  • [26] Effect of annealing time on microstructure and mechanical properties of Fe–C–Mn–Al–Si steel
    Xu, Junjie
    Zheng, Wei
    Jing, Cainian
    Lin, Tao
    Li, Ning
    Zhai, Tongguang
    Materials Science and Technology (United Kingdom), 2024, 40 (05): : 377 - 386
  • [27] Implications of microstructure, Taylor factor distribution and texture on tensile properties in a Ti-added Fe-Mn-Al-Si-C steel
    Sarkar, Arnab
    Sanyal, Souriddha
    Bandyopadhyay, Tapas K.
    Mandal, Sumantra
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 767
  • [28] Effects of cold rolling on microstructure and mechanical properties of Fe-30Mn-3Si-4Al-0.093C TWIP steel
    Shen, Y. F.
    Qiu, C. H.
    Wang, L.
    Sun, X.
    Zhao, X. M.
    Zuo, L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 561 : 329 - 337
  • [29] Tensile yield behavior of Fe-30Mn-3Al-3Si twining-induced plasticity steel
    Wang, Kun
    Li, Zhendong
    Huang, Yingjie
    Wang, Dan
    Han, Fusheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 638 : 1 - 4
  • [30] Smelting and Casting Technologies of Fe-25Mn-3Al-3Si Twinning Induced Plasticity Steel for Automobiles
    Li, Kang-wei
    Zhuang, Chang-ling
    Liu, Jian-hua
    Shen, Shao-bo
    Ji, Yi-long
    Han, Zhi-biao
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2015, 22 : 75 - 79
12345