Experimental and Numerical Investigation of Metal Type and Thickness Effects on the Impact Resistance of Fiber Metal Laminates

被引：110
作者：
Sadighi, M. [1 ]
Parnanen, T. [2 ]
Alderliesten, R. C. [3 ]
Sayeaftabi, M. [1 ]
Benedictus, R. [3 ]
机构：
[1] Amirkabir Univ Technol, Dept Mech Engn, Tehran, Iran
[2] Aalto Univ, Sch Sci & Technol, Helsinki, Finland
[3] Delft Univ Technol TUDelft, Fac Aerosp Engn, Delft, Netherlands
来源：
APPLIED COMPOSITE MATERIALS | 2012年 / 19卷 / 3-4期
关键词：
Fiber metal laminates; Magnesium; Low velocity impact; Numerical modeling; Abaqus; PART; 1; DAMAGE;
D O I：
10.1007/s10443-011-9235-6
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The impact response of fiber metal laminates (FMLs), has been investigated with experiments and numerical simulations, which is reported in this article. Low-velocity impacts were carried out to study the effects of metal type and thickness within FMLs. Glare5-3/2 laminates with two aluminum layer thicknesses and a similar FML containing magnesium sheets were impacted by drop weight tests. Also, a major part of this study was to accomplish a dynamic non-linear transient analysis to study the impact response of FMLs using the commercial finite element (FE) analysis code ABAQUS. By reviewing different approaches of modeling constituents of an FML, it is shown that the appropriate selection of elements has more significant role than failure criterion to predict acceptable results for this type of laminate and loading. The good agreement obtained between experimental and numerical results verifies the possibility of relatively simpler simulation by FE-analysis to predict overall response of FMLs under impact loading.
引用
收藏
页码：545 / 559
页数：15
相关论文
共 30 条
  • [11] Hagenbeek M., 2005, THESIS TUDELFT NETH
  • [12] HASHAGEN F, 1998, THESIS DELFT U TECHN
  • [13] Laliberte J, 2002, ICAS 2002 C INT COUN
  • [14] Impact damage in fiber metal laminates, part 1:: Experiment
    Laliberté, JF
    Straznicky, PV
    Poon, C
    [J]. AIAA JOURNAL, 2005, 43 (11) : 2445 - 2453
  • [15] Liaw B.M., 2001, P SEM ANN C EXP APPL
  • [16] Linde P., 2004, ABAQUS US C BOST MAS
  • [17] Effects of Constituents and Lay-up Configuration on Drop-Weight Tests of Fiber-Metal Laminates
    Liu, Yanxiong
    Liaw, Benjamin
    [J]. APPLIED COMPOSITE MATERIALS, 2010, 17 (01) : 43 - 62
  • [18] Liu YX, 2004, P SEM INT C EXP EXP
  • [19] Modelling bird impacts on an aircraft wing - Part 1: Material modelling of the fibre metal laminate leading edge material with continuum damage mechanics
    McCarthy, MA
    Xiao, JR
    Petrinic, N
    Kamoulakos, A
    Melito, V
    [J]. INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 2005, 10 (01) : 41 - 49
  • [20] Investigation of scaling effects in fiber-metal laminates
    Mckown, S.
    Cantwell, W. J.
    Jones, N.
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2008, 42 (09) : 865 - 888
123