Microstructural Evolution and Toughness in the HAZ of Submerged Arc Welded Low Welding Crack Susceptibility Steel

被引：27

作者：

Qiu, Chunlin ^{[1
]}

Lan, Liangyun ^{[1
]}

Zhao, Dewen ^{[1
]}

Gao, Xiuhua ^{[1
]}

Du, Linxiu ^{[1
]}

机构：

[1] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China

来源：

ACTA METALLURGICA SINICA-ENGLISH LETTERS | 2013年 / 26卷 / 01期

基金：

中国国家自然科学基金;

关键词：

Steel; Heat affected zone (HAZ); Submerged arc welding; Effective grain size; Toughness; Microstructure; HEAT-AFFECTED ZONE; LOW-CARBON; ACICULAR FERRITE; CLEAVAGE; DIFFRACTION; BEHAVIOR;

D O I：

10.1007/s40195-012-0103-7

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Microstructural characteristics of different sub-regions of heat affected zone (HAZ) of low welding crack susceptibility steel weldment were investigated by using optical microscopy and scanning electron microscopy equipped with electron backscattered diffraction system. And the focus was put on the correlation between microstructural characteristics and HAZ toughness of the weldment. The results reveal that the toughness of fusion line zone (FLZ) specimens is much lower than that of fine grained HAZ (FGHAZ) specimens. The coarse inclusions in the weld metal and the large martensite-austenite constituents in the coarse grained HAZ (CGHAZ) have an obvious negative effect on the crack initiation energy of FLZ. Meanwhile, the coarse granular bainite with large effective grain decreases the crack propagation energy seriously. By contrast, fine crystallographic grains in the FGHAZ play a key role in increasing toughness, especially in improving crack propagation energy.

引用

页码：49 / 55

页数：7

共 21 条

[1]

[Anonymous], 2001, 9016 ISO IDT

[2] CLEAVAGE INITIATION IN THE INTERCRITICALLY REHEATED COARSE-GRAINED HEAT-AFFECTED ZONE .1. FRACTOGRAPHIC EVIDENCE [J].

DAVIS, CL ;

KING, JE .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (03) :563-573

[3] The weldability of modern structural TMCP steels [J].

deMeester, B .

ISIJ INTERNATIONAL, 1997, 37 (06) :537-551

[4] Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction.: Study of their toughness behavior [J].

Díaz-Fuentes, M ;

Iza-Mendia, A ;

Gutiérrez, I .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (11) :2505-2516

[5] CRYSTALLOGRAPHIC DIRECTION OF BRITTLE TRANSCRYSTALLINE CLEAVAGE IN THE FERRITE OF LOW-CARBON LOW-ALLOY STEELS [J].

GORITSKII, VM ;

KHROMOV, DP .

STRENGTH OF MATERIALS, 1984, 16 (06) :867-869

[6] Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures [J].

Gourgues, AF ;

Flower, HM ;

Lindley, TC .

MATERIALS SCIENCE AND TECHNOLOGY, 2000, 16 (01) :26-40

[7] An analysis of the microstructure of the heat-affected zone of an ultra-low carbon and niobium-bearing acicular ferrite steel using EBSD and its relationship to mechanical properties [J].

Guo, Aimin ;

Misra, R. D. K. ;

Liu, Jibin ;

Chen, Ling ;

He, Xinlai ;

Jansto, S. J. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (23) :6440-6448

[8]

Huang Y.M., 2010, MAT SCI TECHNOL, V6, P750

[9] Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel [J].

Lambert-Perlade, A ;

Gourgues, AF ;

Besson, J ;

Sturel, T ;

Pineau, A .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (3A) :1039-1053

[10] Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel [J].

Lan, Liangyun ;

Qiu, Chunlin ;

Zhao, Dewen ;

Gao, Xiuhua ;

Du, Linxiu .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 529 :192-200

← 1 2 3 →