Boron Diffused Emitter Etch Back and Passivation

被引：0

作者：

Li, Xiaoqiang ^{[1
]}

Tao, Longzhong ^{[1
]}

Xia, Zhengyue ^{[1
]}

Yang, Zhuojian ^{[1
]}

Dong, Jingbing ^{[1
]}

Song, Wentao ^{[1
]}

Zhang, Bin ^{[1
]}

Sidhu, Rubin ^{[1
]}

Xing, Guoqiang ^{[1
]}

机构：

[1] Hareon Solar Technol Co Ltd, Jiangyin 214407, Jiangsu, Peoples R China

来源：

2012 38TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) | 2012年

关键词：

etch back; boron diffused emitter; passivation; silicon;

D O I：

暂无

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

In this study, a well-controlled etch-back technique was developed using HF and HNO3 mixture solution to remove the boron depletion layer caused by post-oxidation step. The etching rate can be manipulated by changing HF proportion; meanwhile the sheet resistance variation can be maintained smaller than 10% after etching back. Nitric acid oxidation of Si technique was used to passivate the boron emitter before and after etch back. The presence of the surface boron depletion layer makes the surface boron concentration lower, which is better for low D-it at the surface after passivation, while it can also introduce extra recombination by making the electron and hole concentration closer at the surface. PC1D was used to simulate the results for further understanding the recombination in the whole emitter region.

引用

页码：1073 / 1076

页数：4

共 50 条

[21] Investigation of rapid thermal oxide/silicon nitride passivation stack of n+ emitter [J].

El Amrani, A. ;

Kaddour, R. Si ;

Maoudj, M. ;

El Kechai, A. ;

Mezghiche, S. .

CURRENT APPLIED PHYSICS, 2015, 15 (12) :1563-1567

[22] Boron etch-stop in TMAH solutions [J].

Steinsland, E ;

Nese, M ;

Hanneborg, A ;

Bernstein, RW ;

Sandmo, H ;

Kittilsland, G .

SENSORS AND ACTUATORS A-PHYSICAL, 1996, 54 (1-3) :728-732

[23] Surface passivation of phosphorus-diffused emitters by inline thermal oxidation [J].

Mack, S. ;

Wufka, C. ;

Wolf, A. ;

Belledin, U. ;

Scheffler, D. ;

Biro, D. .

PROCEEDINGS OF THE SILICONPV 2011 CONFERENCE (1ST INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS), 2011, 8 :343-348

[24] Industrial bifacial n-type silicon solar cells applying a boron co-diffused rear emitter and an aluminum rear finger grid [J].

Dullweber, Thorsten ;

Wehmeier, Nadine ;

Nowack, Anja ;

Brendemuehl, Till ;

Kajari-Schroeder, Sarah ;

Brendel, Rolf .

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2016, 213 (11) :3046-3052

[25] TOWARDS INDUSTRIALLY FEASIBLE HIGH-EFFICIENCY n-TYPE Si SOLAR CELLS WITH BORON-DIFFUSED FRONT SIDE EMITTER - COMBINING FIRING STABLE Al2O3 PASSIVATION AND FINE-LINE PRINTING [J].

Richter, A. ;

Hoerteis, M. ;

Benick, J. ;

Henneck, S. ;

Hermle, M. ;

Glunz, S. W. .

35TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE, 2010, :3587-3592

[26] Etch-Back Simplifies Interdigitated Back Contact Solar Cells [J].

Zin, Ngwe ;

Blakers, Andrew ;

Franklin, Evan ;

Fong, Kean ;

Kho, Teng ;

Barugkin, Chog ;

Wang, Eric .

2014 IEEE 40TH PHOTOVOLTAIC SPECIALIST CONFERENCE (PVSC), 2014, :3046-3050

[27] Passivated Emitter and Rear Totally Diffused: PERT Solar Cell-An Overview [J].

Atta ur Rehman ;

Muhammad Nadeem ;

Muhammad Usman .

Silicon, 2023, 15 :639-649

[28] Passivated Emitter and Rear Totally Diffused: PERT Solar Cell-An Overview [J].

Rehman, Atta Ur ;

Nadeem, Muhammad ;

Usman, Muhammad .

SILICON, 2023, 15 (02) :639-649

[29] Self-aligned locally diffused emitter (SALDE) silicon solar cell [J].

Salami, J ;

Shibata, A ;

Meier, D ;

Kochka, E ;

Yamanaka, S ;

Davis, P ;

Easoz, J ;

Abe, T ;

Kinoshita, K .

SOLAR ENERGY MATERIALS AND SOLAR CELLS, 1997, 48 (1-4) :159-165

[30] Tuning back side passivation for enhancing the performance of PERC solar cells [J].

Tong, Rui ;

Zhang, Shicheng ;

Liu, Dongming ;

Zhang, Weipeng ;

Wang, Yutao ;

Liu, Xiaofeng .

SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2021, 231

← 1 2 3 4 5 →