FRACTURE TOUGHNESS IN POSTULATED CRACK AREA OF PTS EVALUATION IN HIGHLY-NEUTRON IRRADIATED RPV STEEL

被引：0

作者：

Ha, Yoosung ^{[1
]}

Shimodaira, Masaki ^{[1
]}

Takamizawa, Hisashi ^{[1
]}

Tobita, Tohru ^{[1
]}

Katsuyama, Jinya ^{[1
]}

Nishiyama, Yutaka ^{[1
]}

机构：

[1] Japan Atom Energy Agcy, Nucl Safety Res Ctr, Shirakata2-4, Tokai, Ibaraki, Japan

来源：

PROCEEDINGS OF ASME 2021 PRESSURE VESSELS AND PIPING CONFERENCE (PVP2021), VOL 1 | 2021年

关键词：

Fracture toughness; Vickers hardness; PTS events; Heat-affected zone; Neutron irradiation;

D O I：

暂无

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The Japanese Electric Association Code 4206-2016 requires that the semi-elliptical crack sized 10 mm in depth x 60 mm in length shall be postulated near the inner surface of a reactor pressure vessel (RPV) in pressurized thermal shock events. The fracture toughness distribution was investigated in the postulated crack area under the PTS events of unirradiated and highly-neutron irradiated RPV steels. Vickers hardness in heat-affected zone (HAZ) due to stainless overlay cladding and 10 mm from the cladding were higher than that of a quarter thickness position, where the surveillance specimens are machined, for both unirradiated (E1) and irradiated (up to 1 x 10(20) n/cm(2), WIM) materials. Fracture toughness of HAZ and 10 mm from the cladding was higher for the above highly-neutron irradiated material. The same result was obtained in the unirradiated material. Therefore, it was confirmed that fracture toughness obtained from surveillance specimens can provide conservative assessment of structural integrity of RPV.

引用

页数：6

共 12 条

[1]

[Anonymous], 2015, 42162015 JEAC

[2]

[Anonymous], 1976, PRESSURE TECHNOLOGY

[3]

[Anonymous], 2016, JEAC 4206-2016

[4] Ion-induced irradiation hardening of the weld heat-affected zone in low alloy steel [J].

Ha, Yoosung ;

Takamizawa, Hisashi ;

Katsuyama, Jinya ;

Hanawa, Satoshi ;

Nishiyama, Yutaka .

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2019, 461 :276-282

[5]

IAEA, 2001, 1230 IAEA IAEATECDOC

[6] Mechanical and Microstructural Characterization of Heat-Affected Zone Materials of Reactor Pressure Vessel [J].

Katsuyama, Jinya ;

Tobita, Tohru ;

Nishiyama, Yutaka ;

Onizawa, Kunio .

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012, 134 (03)

[7]

McCabe D. E., 1990, ASTM SPEC TECH PUBL, V1046, P348

[8]

Nakata K., 2006, Q J JAPAN WELDING SO, V24, P205

[9]

Server W., 2013, PVP201397210

[10]

Sokolov M.A., 2018, ORNLTM2018509

← 1 2 →