Comparison of steam-gasification characteristics of coal char and petroleum coke char in drop tube furnace

被引:18
作者
Ding, Lu [1 ]
Zhou, Zhijie [1 ]
Huo, Wei [1 ]
Yu, Guangsuo [1 ]
机构
[1] E China Univ Sci & Technol, Shanghai Engn Res Ctr Coal Gasificat, Minist Educ, Key Lab Coal Gasificat & Energy Chem Engn, Shanghai 200237, Peoples R China
基金
中国国家自然科学基金;
关键词
Drop tube furnace; Steam/char ratio; Thermodynamic equilibrium; Reactivity; CO2; GASIFICATION; CARBON-DIOXIDE; REACTIVITIES;
D O I
10.1016/j.cjche.2014.11.032
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The steam-gasification reaction characteristics of coal and petroleumcoke (PC) were studied in the drop tube furnace (DTF). The effects of various factors such as types of carbonaceous material, gasification temperature (1100-1400 degrees C) and mass ratio of steam to char (0.4:1, 0.6:1 and 1: 1 separately) on gasification gas or solid products were investigated. The results showed that for all carbonaceous materials studied, H-2 content exhibited the largest part of gasification gaseous products and CH4 had the smallest part. For the two petroleum cokes, CO2 content was higher than CO, which was similar to Zun-yi char. When the steam/char ratio was constant, the carbon conversion of both Shen-fu and PC chars increased with increasing temperature. When the gasification temperature was constant, the carbon conversions of all char samples increased with increasing steam/char ratio. For all the steam/char ratios, compared to water gas shift reaction, char-H2O and char-CO2 reaction were further from the thermodynamic equilibrium due to a much lower char gasification rate than that of water gas shift reaction rate. Therefore, kinetic effects may play a more important role in a char gasification step than thermodynamic effects when the gasification reaction of char was held in DTF. The calculating method for the equilibrium shift in this study will be a worth reference for analysis of the gaseous components in industrial gasifier. The reactivity of residual cokes decreased and the crystal layer (L-002/d(002)) numbers of residual cokes increased with increasing gasification temperature. Therefore, L-002/d(002), the carbon crystallite structure parameter, can be used to evaluate the reactivity of residual cokes. (C) 2015 The Chemical Industry and Engineering Society of China, and Chemical Industry Press. All rights reserved.
引用
收藏
页码:1214 / 1224
页数:11
相关论文
共 21 条
[11]   Characteristics of chars prepared from various pulverized coals at different temperatures using drop-tube furnace [J].
Lu, LM ;
Sahajwalla, V ;
Harris, D .
ENERGY & FUELS, 2000, 14 (04) :869-876
[12]   Coal blending with petroleum coke in a pulverized-fuel power plant [J].
Milenkova, KS ;
Borrego, AG ;
Alvarez, D ;
Menéndez, R .
ENERGY & FUELS, 2005, 19 (02) :453-458
[13]  
Shin Y, 2000, INT J ENERG RES, V24, P749, DOI 10.1002/1099-114X(200007)24:9<749::AID-ER614>3.0.CO
[14]  
2-I
[15]   REACTIVITIES OF 34 COALS UNDER STEAM GASIFICATION [J].
TAKARADA, T ;
TAMAI, Y ;
TOMITA, A .
FUEL, 1985, 64 (10) :1438-1442
[16]   Changes in char reactivity and structure during the gasification of a Victorian brown coal: Comparison between gasification in O2 and CO2 [J].
Tay, Hui-Ling ;
Li, Chun-Zhu .
FUEL PROCESSING TECHNOLOGY, 2010, 91 (08) :800-804
[17]   Mass transfer studies during CO2 gasification of torrefied and pyrolyzed chars [J].
Vincent, Shubha Shalini ;
Mahinpey, Nader ;
Aqsha, Aqsha .
ENERGY, 2014, 67 :319-327
[18]   The gasification reactivity of unburned carbon present in gasification slag from entrained-flow gasifier [J].
Xu, Shenqi ;
Zhou, Zhijie ;
Gao, Xuxia ;
Yu, Guangsuo ;
Gong, Xin .
FUEL PROCESSING TECHNOLOGY, 2009, 90 (09) :1062-1070
[19]   Influence of blending methods on the co-gasification reactivity of petroleum coke and lignite [J].
Zhan, Xiuli ;
Jia, Jia ;
Zhou, Zhijie ;
Wang, Fuchen .
ENERGY CONVERSION AND MANAGEMENT, 2011, 52 (04) :1810-1814
[20]   Catalytic effects of Na and Ca from inexpensive materials on in-situ steam gasification of char from rapid pyrolysis of low rank coal in a drop-tube reactor [J].
Zhang, Li-xin ;
Kudo, Shinji ;
Tsubouchi, Naoto ;
Hayashi, Jun-ichiro ;
Ohtsuka, Yasuo ;
Norinaga, Koyo .
FUEL PROCESSING TECHNOLOGY, 2013, 113 :1-7