Measuring the thermal properties of green wood by the transient plane source (TPS) technique

被引：33

作者：

Dupleix, Anna ^{[1
,2
]}

Kusiak, Andrzej ^{[3
]}

Hughes, Mark ^{[2
]}

Rossi, Frederic ^{[1
]}

机构：

[1] Arts & Metiers ParisTech LaBoMaP, F-71250 Cluny, France

[2] Aalto Univ, Sch Chem Technol, Dept Forest Prod Technol, FI-00076 Aalto, Finland

[3] Univ Bordeaux 1, I2M, F-33405 Talence, France

来源：

HOLZFORSCHUNG | 2013年 / 67卷 / 04期

关键词：

green wood; heat capacity; HotDisk (R); thermal conductivity; thermal diffusivity; transient plane source (TPS); CONDUCTIVITY; DIFFUSIVITY; CONSTANTS;

D O I：

10.1515/hf-2012-0125

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

The thermal properties of wood in the green state have been determined by the transient plane source (TPS) technique. Data are presented on thermal conductivity (lambda), heat capacity (C), and thermal diffusivity (kappa) at moisture contents (MCs) above the fiber saturation point, which are based on measurements using the HotDisk (R) apparatus. Four wood species (Douglas fir, beech, birch, and spruce) were tested, and the results are compared with literature data and those obtained by the flash method. A linear relationship was found between the thermal properties lambda, C, and. on the one hand and MC on the other. Equations predicting the thermal values as a function of MC and wood anisotropy are presented. Wood C and lambda increase with MC, but wet wood diffuses heat more rapidly than dry wood.

引用

页码：437 / 445

页数：9

共 20 条

[1]

Beluche G., 2011, MODELISATION NUMERIQ

[2] Determination of the thermal conductivity of wood by the hot plate method:: The influene of morphological properties of fir wood (Abies alba Mill.) to the contact thermal resistance [J].